Looking for Yanmar EG227 parts? Browse our complete range of compatible spare and maintenance parts for the Yanmar EG227 mini tractor—including filters, engine parts, cooling, electrical, and hydraulic components—available directly from stock for fast worldwide delivery.
| Specification | Value |
|---|---|
| General | |
| Brand | Yanmar |
| Model | EG227 |
| Series | Yanmar EG-serie |
| Build years | 2004-2012 |
| What to look for when buying | Inspection points, common issues and price guide View buying guide → |
| Engine | 3TNV88 View → |
| Bore × stroke | 88 × 90 mm |
| Power | 27 hp (19.9 kW) |
| Engine oil filter | 129150-35160 |
| Air filter element | 119808-12520 |
| Fuel filter (strainer element) | 119802-55800 |
| Starter motor doesn't turn | levers not in neutral (reverser/auxiliary gear/PTO) |
| Starter motor turns, engine doesn't start | no fuel, fuel tap OFF, or air in the system |
| Engine runs irregularly | water in the fuel or clogged water separator |
| Engine overheats | coolant level too low or radiator screen clogged |
| Low power | air filter clogged |
| Replace engine oil filter | first time after 50 hours, then every 200 hours |
| Replace fuel filter element | every 300 hours |
| Fuel lines and power steering hoses | check every 50 hours; replace every 2 years |
| Drivetrain | |
| Speed | 2,500 rpm |
| Standard gears | 12 forward / 12 reverse (constant-mesh) |
| High speed (J) | up to approx. 17.6–19 km/h (EG227/230) |
| Clutch | dry single plate |
| Brake | wet disc brake |
| Line filter (transmission/hydraulics) | 198119-48310 |
| Change transmission oil | first time after 50 hours, then every 300 hours (check level in between) |
| Replace line filter (transmission/hydraulics) | every 300 hours |
| Brake pedal play | 25 – 35 mm |
| Clutch pedal play | 15 – 25 mm |
| Dimensions | |
| Length (bare) | 2,820 mm |
| Width | 1,295 mm |
| Height | 1,960 mm |
| Ground clearance | 350 mm |
| Wheelbase | 1,500 mm |
| Weight (standard) | 950 kg |
| Minimum turning radius | 1.85 m (EG220–224) / 1.93 m (EG227/230) |
| PTO and hitch | |
| PTO speeds | 549 / 786 / 1,184 rpm (+ 681 rpm reverse) |
| Capacities | |
| Maximum lift capacity | 11.7 kN (1,200 kgf) |
| Engine oil | 4.3 liters (15W40) View 15W40 → |
| Transmission oil (incl. hydraulics + power steering) | 25 liters (80W GL-4) View 80W GL-4 → |
| Front axle oil | 5.0 liters (80W90) View 80W90 → |
| Coolant (radiator) | 4.4 liters View coolant → |
| Fuel tank | 28 liters |
| Grease | multipurpose grease, EP2 |
| Other | |
| Displacement | 1,642 cc |
| J-change (X) | electronically controlled HST, 30 forward / 30 reverse (EG224/227/230) |
| Steering | full hydraulic power steering |
| Lifting mechanism | position and automatic control, special 3-point |
| Tilling depth control | auto uphill control (automatic) |
| Levelling control | Nicety UFO (U version) |
| Safety cab/frame | SF302F |
| Typical use | heavier ground work, plowing, front loader |
| Q | Cab |
| U | Nicety UFO |
| X | J-change |
| J | High speed |
| EG227 / EG230 | 549 / 786 / 1,184 rpm (+ 681 rpm reverse) |
| 1 – 2 | border tilling / shallow work |
| 2 – 3 | general tilling |
| 3 and higher | deep tilling |
| Water separator element | 129242-55730 |
| HST oil filter | 198129-29310 |
| Charge light stays on while driving | V-belt loose/broken or charging fault — check belt tension |
| Water temperature in red zone | overheating — stop, let idle to cool down, find the cause |
| Fault light (J-change) flashing | drive fault; turn the key OFF once and restart, if it persists: have it checked |
| Implement doesn't lift | oil stop/slow-return valve closed, oil level too low or oil filter clogged |
| Implement doesn't lower | oil stop/slow-return valve closed or auto-cable out of adjustment |
| Reverse lift doesn't work | back-up button switched off |
| above 5 °C | approx. 1 second |
| 5 °C to −20 °C | 3 – 5 seconds |
| below −20 °C | 23 – 25 seconds |
| 0 °C to −10 °C | at least 10 minutes |
| −10 °C to −20 °C | at least 20 minutes |
| HST oil filter (J-change only) | every 300 hours |
| Change front axle oil | every 300 hours (check level every 50 hours) |
| Drain/clean water separator | every 100 hours (check daily) |
| Clean radiator screen | every 50 hours (more often when working in dusty conditions) |
| Grease all lubrication points | every 50 hours, and always after wet work |
| Check V-belt (cooling fan) | every 100 hours (new belt: retension after 50 hours) |
| Check battery | every 100 hours |
| Retighten wheel bolts | first time within 10 hours, then every 100 hours |
| V-belt deflection | 10 – 15 mm |
| Compressor belt (cabin) | 10 – 15 mm |
| Front wheel toe-in | 1 – 8 mm |
Maintaining or repairing your Yanmar EG227 mini tractor starts with parts that fit accurately. On this page you will find all compatible Yanmar EG227 spare parts—from oil, fuel, and air filters to water pumps, radiator hoses, clutches, brakes, front axle seals, three-point linkage parts, and electrical components. Use the category filter to quickly jump to the exact assembly for your Yanmar EG227.
Looking for parts for another Yanmar model? View our complete range of Yanmar mini tractor parts or contact our team for expert support.