| Subtotal | €603,69 |
|---|---|
| Shipping to Netherlands | Free |
| Total | €603,69 |
The right oil and the right amount: below you'll find all fluid specifications and capacities for the Yanmar EG220, EG224 and EG230 from the original factory manual.
Suitable for the entire series: EG220, EG222, EG224, EG227 and EG230 — including the Q (cab), U (Nicety UFO), X (J-change) and J (high speed, including EG227J and EG230J) versions.
The manual specifies a diesel engine oil SAE 10W-30, class API CD or higher (original Yanmar Super Nooki or Super Royal 10W-30). A good mineral 15W-40 API CD is widely used in Dutch practice and works well for normal seasonal work; in severe frost and cold starts, opt for the thinner 10W-30 instead. Change the oil for the first time after 50 hours, then every 100 hours or annually.
| Fluid | EG220 / EG222 / EG224 | EG227 / EG230 |
|---|---|---|
| Engine oil | 3.6 liters | 4.3 liters |
| Transmission oil (incl. hydraulics + power steering) | 25 liters | 25 liters |
| Front axle oil | 5.0 liters | 5.0 liters |
| Coolant (radiator) | 3.5 liters | 4.4 liters |
| Coolant (expansion tank) | 0.3 liters | 0.3 liters |
| Fuel tank | 28 liters | 28 liters |
| Application | Specification |
|---|---|
| Transmission / hydraulics / power steering | Yanmar TF-500 transmission fluid (one shared oil) |
| Front axle | gear oil SAE #90 (EP #90) |
| Coolant | permanent antifreeze, type JIS K2234 class 2 (year-round) |
| Fuel | diesel oil; use winter diesel at temperatures below −10 °C |
| Grease | multipurpose grease, EP2 |
Important: on these tractors, the transmission oil is also the hydraulic and power steering oil. Use the prescribed TF-500 for this; the wrong oil can disrupt the lifting function and power steering system. The front axle has its own separate #90 gear oil — don't confuse the two.
💡 Product tip: Changing the engine oil? Be sure to replace the engine oil filterat the same time. A suitable dieselengine oil (API CD) can be found at Shop4trac.