Looking for Mitsubishi MT201 parts? Browse our complete range of compatible spare and maintenance parts for the Mitsubishi MT201 mini tractor—including filters, engine parts, cooling, electrical, and hydraulic components—available directly from stock for fast worldwide delivery.
| Specification | Value |
|---|---|
| General | |
| Brand | Mitsubishi |
| Model | MT201 |
| Series | Mitsubishi MT-serie |
| Build years | 1996-2003 |
| What to look for when buying | Inspection points, common issues and price guide View buying guide → |
| Engine type | Mitsubishi S3L2 |
| Power | 14.7–17.7 kW (20–24 hp) at 2,500 rpm |
| Fuel | Diesel |
| Fuel filter | Clean / replace |
| Fuel hoses | Check / replace |
| Engine oil filter | MD134953 |
| Fuel filter element | MM404879 (O-rings MM404881 / MM404878) |
| Air filter element | 1030-0511-200 |
| No fuel or fuel tap set to OFF | Refuel, turn tap to ON, bleed the system |
| Fuel filter clogged | Clean the filter or replace the element |
| Air in the fuel system | Bleed at the bleed nipple until fuel runs free of bubbles |
| Glow plugs faulty (cold start) | Test the glow plugs (resistance measurement after removing the connecting strip) and replace |
| Drivetrain | |
| Transmission | 8 forward / 8 reverse |
| Clutch pedal / brake pedals | Check free play |
| Clutch pedal not fully depressed (safety switch) | Press the pedal all the way down; if that works, check the switch adjustment |
| Dimensions | |
| Length (to tow hitch) | 2,700 mm |
| Width | 1,155 mm |
| Height (top of steering wheel) | 1,925 mm |
| Ground clearance | 330 mm |
| Wheelbase | 1,475 mm |
| Weight | 895–900 kg |
| Turning circle (radius) | 1.9 m |
| Front tires | 6-14 |
| Rear tires | 8.3-24 |
| Top example: low hours, new tyres, ready to use immediately | € 4,750 – € 6,500 |
| PTO and hitch | |
| PTO speeds | 564 / 809 / 1,321 rpm |
| PTO reverse | 1,042 rpm |
| PTO shaft | JIS 35 mm |
| Capacities | |
| Tank capacity | 20 liters |
| Engine oil (crankcase) | 3.8 liters (15W40) View 15W40 → |
| Transmission / hydraulics | 20 liters (80W GL-4) View 80W GL-4 → |
| Front axle | 2.5 liters (80W90) View 80W90 → |
| Cooling system | 4.2 liters |
| Fuel tank | 20 liters |
| Lubrication points (pedals, tie rod ends) | As needed, every 50 hours |
| Other | |
| Construction | Water-cooled 4-stroke three-cylinder diesel |
| Displacement | 1,318 cc |
| Battery | 12 V – 45 Ah |
| Lift control | Position control (PAC/JAC/MAC versions) |
| Attachment | 3-point linkage, JIS category 0 |
| Steering system | Power steering standard |
| P | Power steering (optional on the light group, standard from the MT201 onward) |
| J / M | JAC or MAC version: more extensive electronic lift control (in addition to the basic PAC). MAC is the most complete version, featuring automatic depth control among other things |
| W | Wide tyres (e.g. MT201W with 9.5-22 rear tyres) |
| E | Super creep gear (extra slow driving speeds) |
| S | On the MT161: smaller tyres; on the MT241: low-profile version |
| Project machine / high hours, without registration | € 2,000 – € 3,500 |
| Well-maintained used machine, average hours, with registration | € 3,500 – € 5,000 |
| With front loader or set of implements | € 500 – € 1,500 extra |
| V-belt | Check / tension |
| Grease nipples (pedals, tie rods) | Grease |
| V-belt deflection | 10–13 mm at ±10 kg pressure applied to the center |
| Clutch pedal free play | 20–30 mm |
| Brake pedal free play | 30–40 mm, equal on left and right |
| Hydraulic filter | 1032-2509-000 |
| 20–22 hp (MTZ200 | Rotary tiller 1.20–1.40 m, single-furrow plough, flail mower ±1.20 m, wood chipper (light), backpack sprayer/field sprayer, small potato digger |
| 1 | Clean the machine thoroughly and let it dry |
| 2 | Grease bare metal and threads |
| 3 | Run the engine for ±5 minutes and check oil levels |
| 4 | Check antifreeze concentration |
| 5 | Fill the fuel tank completely and turn the fuel valve OFF |
| 6 | Set tires to standard pressure, place boards under the wheels |
| 7 | Lower the implement (tiller) to the ground |
| 8 | Remove weights |
| 9 | Press the clutch pedal down and secure it with the hook |
| 10 | Disconnect the battery (negative terminal) or remove it and store it in a frost-free place |
| Battery flat or battery terminals loose/corroded | Charge or replace the battery (12V 45Ah); clean terminals, tighten and grease them |
| Fuse blown | Check the wiring, replace the fuse (fuse box with spare positions) |
| White (after warming up) | Too much engine oil, or coolant in the cylinder |
| Black | Air filter clogged or poor fuel quality |
| Blue | Oil consumption: piston rings or valve seals worn |
| Glow plug light | Preheating active; goes out when the engine is ready to start |
| Oil pressure light | Must go out after starting. If it stays on during operation: switch off the engine, check oil level and filter |
| Charge light | Must go out after starting. If it stays on during operation: check the V-belt or alternator |
| Tachometer with hour meter | Keep track of working hours for the maintenance schedule View → |
| Diff lock indicator | Lights up as long as the differential lock is engaged |
Maintaining or repairing your Mitsubishi MT201 mini tractor starts with parts that fit accurately. On this page you will find all compatible Mitsubishi MT201 spare parts—from oil, fuel, and air filters to water pumps, radiator hoses, clutches, brakes, front axle seals, three-point linkage parts, and electrical components. Use the category filter to quickly jump to the exact assembly for your Mitsubishi MT201.
Looking for parts for another Mitsubishi model? View our complete range of Mitsubishi mini tractor parts or contact our team for expert support.