-
Chassis27 Products -
Clutch / transmission17 Products -
Cooling & radiators5 Products -
Electrical parts3 Products -
Engine parts36 Products -
Filters8 Products -
Oil11 Products
Thumbnail image
Product
Price
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- Oil pressure switch suitable for many models, including:
- Kubota
- A13, A14, A15, A17, A19, A30, A155, A175, A195
- B1550, B1700DT, B1750, B1830, B2100, B2150, B2310, B2320DT, B2400, B2410, B2601HSD, B2620, B2630, B2650, B2710, B2910, B2920, B3000, B3030, , B3300, B3350, B4200, B4850DT, B6200HST, B7200, B7300, B7500, B7410, B7510, B7610, B7800, B8200, B9200
- B20, B21, B26
- Oil Seal - oil seal suitable for the front axle in the tractors shown below. With great care, the models at this seal were sought!
- Technical data
- 35х52х12
- Iseki
- TX145, TX155, TX1000, TX1210, TX1300, TX1410, TX1500, TX1510, TX2140, TX2160
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
- Thermostat with gasket suitable for the following types:
- Shibaura
- ST318, ST321, ST324
- P15F, P17F, P145F, P155F, P165F, P175F, P185F
- SP1400, SP1440, SP1500, SP1540, SP1700, SP1740, SP1800, SP1840, SP2140
- ✅ With thermostat gasket
- Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
- The piston rings are of high European quality and compatible models have been sought with great care:
- Kubota
- A-13, A-14
- B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
- G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
- Strong, durable fastener for the cylinder head of your Kubota engine.
- This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
- Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
- ? Technical data:
- ✔️ Application: Z402, Z482, Z602 and related variants
Showing 12 of 92 products
