-
Chassis23 Products -
Clutch / transmission12 Products -
Cooling & radiators10 Products -
Electrical parts12 Products -
Engine parts51 Products -
Filters9 Products -
Oil11 Products
Thumbnail image
Product
Price
- We only work with high-quality oil filters from German or other European suppliers!
- Thread: M20x1.5
- Diameter: 80.0 mm
- Height: 80mm
- Below is the listing that we have meticulously selected from our suppliers. If the machine is listed below then it fits 100%.
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical specifications:
- Voltage: 12 V
- Power: 1.4 kW
- Flange diameter: 66.0 mm
- Filter Kit suitable for the Kubota D722 engine in general. To be sure, check the dimensions of the air filter and fuel filter !
- Very important! This set includes a sump plug copper seal. The oil sump plug seal is often forgotten, which causes oil leakage. It must always be replaced!
- Consisting of:
- Oil filter
- Fuel filter
- Oil pressure switch suitable for many models, including:
- Kubota
- A13, A14, A15, A17, A19, A30, A155, A175, A195
- B1550, B1700DT, B1750, B1830, B2100, B2150, B2310, B2320DT, B2400, B2410, B2601HSD, B2620, B2630, B2650, B2710, B2910, B2920, B3000, B3030, , B3300, B3350, B4200, B4850DT, B6200HST, B7200, B7300, B7500, B7410, B7510, B7610, B7800, B8200, B9200
- B20, B21, B26
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
- ✅ With thermostat gasket
- Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
- The piston rings are of high European quality and compatible models have been sought with great care:
- Kubota
- A-13, A-14
- B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
- G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
Showing 12 of 115 products
