Looking for Iseki AT33 parts? Browse our complete range of compatible spare and maintenance parts for the Iseki AT33 mini tractor—including filters, engine parts, cooling, electrical, and hydraulic components—available directly from stock for fast worldwide delivery.
| Specification | Value |
|---|---|
| General | |
| Brand | Iseki |
| Model | AT33 |
| Series | Iseki AT GEAS |
| Build years | 1997-2004 |
| What to look for when buying | Inspection points, common issues and price guide View buying guide → |
| Fuel | Diesel fuel JIS 2 (JIS 3 in severe frost) |
| Power | 24.3 kW / 33 hp |
| Engine valve clearance | Check (dealer) |
| Change engine oil and engine oil filter | Old oil contains combustion acids that can cause internal corrosion during downtime |
| Clean or replace the air filter element if the interval is approaching | Prevents a dirty start-up in spring |
| Check radiator hoses and fuel lines for cracks | Rubber ages even when not in use |
| Starter motor doesn't turn when "Starting" | Clutch pedal not fully depressed |
| Starter motor faulty | Dealer |
| Starter motor turns, but slowly | Battery insufficiently charged |
| Fuel pump not working properly | Check/replace fuse |
| Starter motor turns, but engine won't start | Air in the fuel system |
| Fuel filter clogged | Clean/replace |
| Fuel not supplied | Turn fuel filter tap to "ON" |
| Internal engine fault | Dealer |
| Injector clogged/fuel leak/injection pump faulty | Dealer |
| Fuel pump faulty | Check/replace fuse |
| Engine stalls at lower RPM | Injection pump faulty, valve clearance incorrect, injector faulty |
| Engine runs at too high RPM (racing) | Governor contaminated, oil rising |
| Engine suddenly stalls | Fuel shortage |
| Injector faulty/engine seized | Dealer |
| Insufficient fuel supply | Dealer |
| Drivetrain | |
| Engine speed | 2800 rpm |
| Drive | Four-wheel drive (4WD) |
| Clutch | Dry single-plate |
| Brake | Wet disc brake |
| Transmission | Constant mesh, 16 gears + 4 road ranges (AT-shift) |
| Forward speed | 0.2 - 14.7 to 14.9 km/h (per model) |
| Reverse speed | 0.2 - 11.7 to 12.9 km/h (per model) |
| Clutch pedal play | Check/adjust |
| Brake pedal play | Check/adjust |
| Grease points (kingpin, brake arm, tie rod ends) | Grease |
| Power steering hose / level cylinder hose / auto-brake hose (SQ) | Replace (dealer) |
| Grease all lubrication points (central pivot, brake arm, tie rod ends) | Prevents seizing up during downtime |
| Clutch pedal switch faulty | Have it repaired/replaced by dealer |
| Clutch slipping | Pedal clearance incorrect |
| Clutch doesn't disengage fully | Pedal clearance incorrect |
| Brake worn/seized | Dealer |
| Brake pedal returns poorly | Return spring faulty |
| Doesn't drive forward or reverse | Lever not set to neutral before starting |
| Dimensions | |
| Length | 3090 mm |
| Width | 1455 mm |
| Height (cab) | 1990 mm |
| Wheelbase | 1730 mm |
| Ground clearance | 385 mm |
| Weight (cab) | 1385 kg (1500 kg) |
| Front tire | 8-16-4PR |
| Rear tire | 12.4-26-4PR (AT30) / 13.6-24-4PR (AT33) |
| Minimum turning radius | 2.0 m |
| Height | 1910 mm |
| Weight | 1305 kg |
| Weight (with cab) | 1385 kg (1500 kg) |
| Rear tyre size | 13.6-24 |
| Tire pressure | Check/top up |
| Tire pressure at the correct value, tractor on hard, dry ground | Prevents flat spots and rim corrosion during long periods of downtime |
| Tire pressure incorrect | Bring to correct pressure |
| PTO and hitch | |
| PTO speeds | 569 / 765 / 942 / 1227 rpm at 2500 engine rpm (AT23-27); 588 / 790 / 974 / 1268 rpm at 2800 engine rpm (AT30-33) |
| PTO shaft size | JIS35 (splined) |
| PTO speeds (rpm) | 588 / 790 / 974 / 1268 |
| Reverse PTO | 790 rpm |
| Capacities | |
| Fuel tank | 35 liters |
| Engine oil | 5.3 litres (15W40) View 15W40 → |
| Transmission oil (gearbox, also hydraulics) | 35 litres (UTTO / GL-4) View UTTO / GL-4 → |
| Front axle oil | 7 litres (AT23, AT25-02, AT27N) or 7.5 litres (AT25, AT27, AT30, AT33, AT27-02, AT27N-06, AT30-02, AT33N, AT33N-06) (80W90) View 80W90 → |
| Coolant (radiator) | 5.1 litres View coolant → |
| Windscreen washer fluid (cabin version) | As needed |
| Battery (fluid level) | Check/top up |
| Windshield washer fluid | Top up |
| Other | |
| AT33 | T0884 |
| Type | E3CD |
| Design | Water-cooled, 4-stroke, 3-cylinder diesel |
| Displacement | 1,498 cc |
| Battery | 80D26R, 12V / 55Ah |
| Front track | 1150 mm |
| Rear track (ex factory) | 1100 mm |
| Rear adjustment range | 1100-1420 mm |
| Steering | Power steering (hydraulic) |
| Drawbar | Fixed hitch (available as separate accessory) |
| Lift system | Position control, 3-point linkage JIS category I |
| AT27N / AT33N | €7,000 – €14,000 (indicative, comparable class, no narrow-track-specific data found) |
| Fan belt (V-belt) | Check tension |
| Steering ball joint | Check (dealer) |
| Toe-in (track adjustment) | Check/adjust (dealer) |
| Tie rod end (mounting) | Inspect (dealer) |
| Electrical wiring | Replace (dealer) |
| A/C belt | Check/adjust |
| Realistically usable for | Front loader, heavier soil cultivation, wider rotary tillers, ploughing on light soil |
| Keep the battery charged | Check fluid level according to schedule (every 100 hours or once a year); periodic charging during storage prevents sulfation |
| Battery discharged | Charge battery |
| Terminals loose | Tighten |
| Ground connection corroded | Remove rust and tighten (with grease) |
| Ignition switch faulty | Dealer |
| Irregular idling/running | Air in fuel system |
| Overheating | Coolant shortage |
| Fan belt loose/damaged | Adjust/replace |
| Radiator clogged | Clean |
| White exhaust smoke | Air filter clogged |
| Black exhaust smoke | Too much fuel supplied or injector pressure too low |
| Poor or uneven left/right braking | Pedal clearance incorrect |
| Uneven pedal travel left/right | Adjust pedal travel |
| Pivot point corroded | Remove rust and lubricate |
| Steering heavy or pulls to one side | Steering shaft incorrectly adjusted |
| Toe-in adjustment incorrect | Dealer |
| Play in ball joint | Dealer |
| Too much play in the steering wheel | Steering shaft worn or play in ball joint |
| Fuse blown | Replace fuse |
| Hydraulic system faulty | Dealer |
| Electrical/sensor fault | Dealer |
| Can't shift | Fuse blown |
| Doesn't work | Single-dial work selector switch still set to "Driving (Loader)" or "4WD" |
| Works unevenly left/right | Sensor incorrectly adjusted |
| 1 | Connect the left and right brake pedals to each other (required for driving) |
| 2 | Press the brake pedal fully and secure the parking brake with the lever |
| 3 | Put all gear levers in neutral: the PTO lever in neutral, the linear shift lever (AT-shift, F/N/R) in neutral, and the subrange lever in neutral (between "Low (work 1)" and "High (work 2)"/"Transport") |
| 4 | Set the throttle lever to approximately half throttle |
| 5 | Press the clutch fully in — the engine will only start if the clutch is fully engaged |
| 6 | Turn the ignition switch to "Run/Pre-heat" and wait until the pre-heat icon goes out |
| 7 | Continue turning to "Start" |
| Stop | Engine off, key can be removed |
| ACC | Engine off, radio/cassette works |
| Run/Pre-heat | Automatic pre-heating + normal driving position |
| Start | Starts the engine; releasing the key automatically returns to "Run/Pre-heat" |
Maintaining or repairing your Iseki AT33 mini tractor starts with parts that fit accurately. On this page you will find all compatible Iseki AT33 spare parts—from oil, fuel, and air filters to water pumps, radiator hoses, clutches, brakes, front axle seals, three-point linkage parts, and electrical components. Use the category filter to quickly jump to the exact assembly for your Iseki AT33.
Looking for parts for another Iseki model? View our complete range of Iseki mini tractor parts or contact our team for expert support.