-
Chassis280 Products -
Clutch / transmission252 Products -
Cooling & radiators240 Products -
Electrical parts167 Products -
Engine parts1274 Products -
Filters255 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted. This ‘Snelparts‘ injector is ready for immediate installation.
- This is the versatile fuel injector for Yanmar Indirect Injection (IDI) engines. It is suitable for both the well-known marine engines (GM-series) and industrial engines (TNE-series) in excavators and generators.
- advice from experience:
- Application: This fuel injector covers a huge range of engines. From the sailboat engine (2GM20) to the Komatsu mini excavator (PC15).
- Installation: Make sure the old fire washers (at the bottom of the shaft) are removed before installing the new ones. Stacking washers will cause an incorrect injection angle and smoking.
- Piston suitable for:
- Kubota Engine
- Z402
- Aixam
- 400 (1997-2004), 400.4 (1997-2004), 400 Evolution (1997-2004), 500.4 (1997-2004), 500.4 Minivan (1997-2004), 500.4 Pick-Up (1997-2004)
- Exclusive from our own production line: a high-quality fuel injector nozzle that meets the strictest tolerances. This 'Snelparts' injector tip is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality such as well-known brands in this industry!
- technical specifications
- Opening pressure (setting value): approx. 120 – 130 Bar (12.0 – 13.0 MPa)
- Connecting Rod Bearing suitable for:
- Kubota
- A-15, A-155, A-17, A-175, A-19, A-195
- B1700, B1710, B1830DT, B2100, B2110DT, B2400DT, B2410, B2620, B2710
- GB15, GB16, GB18, GB20, GB150, GB155, GB160, GB170, GB175, GB180, GB200
- Why this complete maintenance set? With this set you can go for at least 2 years. Many forget that a little effort can yield big savings. And it saves more than €30!
- Complete Maintenance Kit consists of
- V-belt
- Filter Kit – fuel+oil+air filter
- Motor oil - (4.2 litres required) – 5 litres – sufficient for these tractors
- ✅ Filter Set | Maintenance Set for Iseki TA & Landleader tractors
- The complete maintenance set for 500 operating hours – get started right away with confidence!
- This set has been carefully compiled for the Iseki TA and Landleader tractors. Contains all essential filters to keep your tractor running smoothly and reliably.
- Very important! This set is including sump plug copper washer. The oil sump plug washer is often forgotten, causing oil leakage. This should always be replaced!
- Contents of the set:
- Suitable for the following Kubota tractors:
- Kubota
- B1200,B1400, B1402, B1500, B1502, B1600, B1700, B1702, B1902, B2100, B2400, B2410, B2710, B2910, B7300, B7800
- B1550D, B1550E, B1550HST-D, B1550HST-E, B1750, B1750E, B1750HST-D, B1750HST-E, B2410HSD, B3200HSD, B3300HSD, B4200D, B5200D, B5200E, B6100HSTE, B6200D, B6200E, B6200HSTD, B6200HSTE, B7100HSTD, B7100HSTE, B7200D, B7200E, B7200HSTD
- F2000
- Parts for your mini tractor often do not contain all the gaskets. The solution for this is a liquid gasket that seals the part and prevents leakage. Black Gasket Maker is a flexible, waterproof filler and adhesive, resistant to high temperatures. It is a polysiloxane based product in a pressure cartridge to quickly and easily make seals and gaskets. Characteristics
- Resistant to oils, transmission oils, water, antifreeze, grease, smoke and hot toxic gases.
- Replaces cork, felt, paper and rubber gaskets.
- Resistant to low temperatures down to -40°C (continuous) and to high temperatures up to 232°C (continuous) and 300°C (short-term).
- Is harmless to electronic sensors and catalytic converters.
- Exhaust gasket suitable for:
- Iseki
- TU120, TU130, TU140, TU145, TU150, TU155, TU157, TU160, TU165, TU170, TU175, TU177
- TU1400, TU1401, TU1500, TU1600
- TX145, TX155
- Suitable for: Kubota L2002, L1802, L2202, L2402
- Complete propeller shaft between engine and gearbox for Iseki. Available in two versions: the standard version for the TU Landhope series (TU120-TU247) and the long version (35 cm) specifically for the Iseki 3025 (Sial series). Choose the correct version for your tractor below.
- Seat fits multiple models and brands. The following is a list on which the chair fits 100%.
- Kubota
- B5000, B5001, B6000, B6001, B6100, B7000, B7001, B7100
- Zen-noh
- ZB5000, ZB5001, ZB6000, ZB6001, ZB7000, ZB7001, ZB7100, ZB7200
Showing 12 of 2,417 products
