Mitsubishi MTX13 & MTX15: all technical specifications at a glance
Mitsubishi MTX13 & MTX15: all technical specifications
Looking for the technical specifications of the Mitsubishi MTX13 or MTX15? Below you'll find all the data for both compact tractors, taken directly from the original Japanese factory manual. Handy when ordering parts, adjusting the machine, or comparing it with other compact tractors.
Suitable for the entire series: Mitsubishi MTX13D and MTX15D (both standard 4WD).
Mitsubishi MTX13 & MTX15 engine specifications
| Engine | MTX13D | MTX15D |
|---|---|---|
| Type | Mitsubishi L3A | Mitsubishi L3C |
| Configuration | Water-cooled 4-stroke 3-cylinder diesel engine | |
| Displacement | 696 cc | 808 cc |
| Power | 13 hp at 2,700 rpm | 14.9 hp at 2,700 rpm |
| Fuel | Diesel (in Japan: JIS no. 2 or no. 3) | |
| Tank capacity | 17 liters | |
| Starting system | Electric starter motor with pre-glow indicator (±6 sec.) | |
The L3A and L3C come from the same Mitsubishi L-series engine family, also used in Iseki Landhope tractors, Toro mowers, and many mini excavators. This means parts such as the water pump (SKU-337), thermostat 76.5°C (SKU-45001) and glow plugs (SKU-559014) are readily available.
Mitsubishi MTX13 & MTX15 dimensions and weight
Both models were supplied with standard tires or with smaller tires (narrow-track version); the dimensions therefore differ slightly.
| Dimension | Standard tires | Small tires |
|---|---|---|
| Length | 2,000 mm | 2,000 mm |
| Width | 995 mm | 965 mm |
| Height (top of steering wheel) | 1,195 mm | 1,175 mm |
| Wheelbase | 1,200 mm | 1,200 mm |
| Front track width | 790 mm | 845 mm |
| Rear track width (adjustable) | 755 / 905 mm | 755 / 905 mm |
| Ground clearance | 225 mm | 205 mm |
| Weight MTX13D | 535 kg | 520 kg |
| Weight MTX15D | 540 kg | 525 kg |
| Turning radius | 1.8 m | |
Mitsubishi MTX13 & MTX15 transmission and driving speeds
| Clutch | Dry single-plate clutch |
| Gearbox | Sliding gear transmission, 6 forward (3 gears × high/low) and 2 reverse |
| Differential | Bevel gear drive, with differential lock (deflock) |
| Brakes | Mechanical, internal expanding brake shoes, separated per rear wheel |
| Forward speed | 0.81 – 11.76 km/h (small tires: 0.76 – 11.01 km/h) |
| Reverse speed | 1.03 and 5.16 km/h |
Mitsubishi MTX13 & MTX15 PTO and lift system
| PTO speeds | 561 / 827 / 1,355 rpm (at 2,700 engine rpm) |
| PTO shaft | JIS 35 mm |
| Lift system | Hydraulic, 2-point attachment with toolbar |
| Lift control MTX13D | Auto-return |
| Lift control MTX15D | PAC (Position Auto Control) |
Note: the MTX series has a 2-point implement attachment with toolbar and does not have a standard category 1 three-point hitch. More about this in Mitsubishi MTX13 & MTX15 hydraulics, PTO, and implements.
Mitsubishi MTX13 & MTX15 tires and pressure
| Standard | Small tires | Pressure | |
|---|---|---|---|
| Front | 5-12 | 4.50-10 | 1.2 kg/cm² (±1.2 bar) |
| Rear | 8-16 | 7-16 | 1.0 kg/cm² (±1.0 bar) |
Mitsubishi MTX13 & MTX15 electrical system
The system is 12 volt with a maintenance-free (MF) battery located at the front of the machine, behind the grille. From the manual, for reference when ordering electrical parts: headlights 12V-35W (2 pieces), turn signals 12V-15W (2 pieces), and a fusible link (main fuse) in the wiring, in addition to the regular fuses. When disconnecting the battery, always loosen the negative terminal first; when connecting, tighten the positive terminal first.
🔧 Parts for your MTX13 or MTX15
From filter set (SKU-100119) to complete engine gasket set for the L3C (SKU-65002) and main bearing set L3A/L3C (SKU-110016): everything for the MTX series can be found at Shop4trac.
