Iseki TU1400-TU1601: filters, gaskets and K3 parts
Iseki TU1400-TU1601: parts overview
Because the Mitsubishi K3A, K3B and K3C engines were carried over unchanged between the 00-series (TU1400/1500/1600) and the 01-series (TU1401/1501/1601), most engine and drivetrain parts below fit both generations. Where a part is specific to one engine code (and therefore not interchangeable between, for example, a TU1400 and a TU1600), this is indicated.
Suitable for the entire series: Iseki TU1400, TU1400F, TU1500, TU1500F, TU1600, TU1600F, TU1401, TU1401F, TU1501, TU1501F, TU1601, TU1601F.
Filters
- Filter set (oil, air and fuel filter) Iseki TU1400F-TU1600F | TU1401-TU1601 — € 23.50
- Engine oil filter (separate) — € 8.95
- Engine oil filter + 15W-40 engine oil set — € 39.50
- Air filter — € 14.50
Gaskets (engine-specific — check the correct engine code!)
- For the K3A (TU1400/TU1401): complete gasket set K3A — € 109.50, or the basic set K3A — € 98.50
- For the K3B (TU1500/TU1501): complete gasket set K3B — € 109.50
- For the K3C (TU1600/TU1601): complete gasket set K3C — € 89.50, or the basic set K3C — € 98.50
- Oil pan gasket (fits all K3 engines) — € 13.50
Please note: the head gasket, pistons and cylinder head differ per engine code due to the different bore size (65 / 68 / 70 mm) — a K3A gasket set therefore does not fit a K3B or K3C engine, even if it's mounted in exactly the same tractor frame.
Cooling
- Water pump (fits K3A, K3B and K3C) — € 59.50
- Radiator including hoses — currently temporarily out of stock, please contact us for delivery time
- V-belt (fan belt) — € 16.50
Exhaust
- Exhaust manifold (K3A/K3B, incl. gasket) — € 72.50
Clutch and transmission
- Complete clutch set — € 139.50
- Pressure plate assembly — € 76.50
- Clutch connector piece — € 74.50
Steering and axles
- Steering oil seal — € 6.90
- Front axle seal (4WD) — € 19.50
- Brake shoes — temporarily out of stock
Electrics
- Alternator — € 134.50
- Voltage regulator — € 49.50
- Solenoid (starter solenoid switch) — € 68.50
Lift and PTO
- 3-point lift set 12×500 — € 89.50
- Stabilizer lift arm set (275 mm) — € 19.50
- Top link mount — temporarily out of stock
Appearance
- Front grille — € 146.50
- Sticker set (specific to the 00-series) — € 19.50
Not sure which part fits your machine? Send us the chassis number and (if visible) the engine code from the identification plate — we'll be happy to help.
