Iseki TE4270 specifications — complete overview
Iseki TE4270 specifications — complete technical overview
All technical data for the Iseki TE4270 at a glance, verified from the original manual. A handy reference for maintenance, ordering parts, or a purchase.
Engine
| Item | Value |
|---|---|
| Type | E3AE1, water-cooled 4-stroke diesel |
| Cylinders | 3 |
| Displacement | 1,296 cc |
| Bore × stroke | 80 × 86 mm |
| Power | 27 HP @ 2,600 rpm |
| Combustion chamber | Swirl chamber |
| Lubrication | Pressure circulation |
| Air filter | Dry, cyclone |
| Fuel | Diesel JIS 2 (JIS 3 in severe cold) |
| Fuel tank | 28 liters |
| Start | Starter motor with glow plugs |
Dimensions and weight
| Item | 2WD | 4WD |
|---|---|---|
| Overall length (to lower lift arm) | 294 cm | |
| Overall width (rear track 102 cm) | 132 cm | |
| Overall height | 198 cm | 203 cm |
| Wheelbase | 165 cm | |
| Min. ground clearance | 37 cm (transmission) | 33.5 cm (front axle) |
| Min. turning radius (without brakes) | 270 cm | 260 cm |
| Weight | 1,020 kg | 1,110 kg |
Transmission
Sliding/synchromesh transmission (types M and S fully synchronized). Speed is determined by the combination of main gear, range selector, and creeper gear. The travel range runs from approximately 0.2 km/h (creeper gear) up to over 21 km/h in top gear. Differential with diff-lock; brakes are wet, multi-disc.
Tires
| 2WD | 4WD | |
|---|---|---|
| Front | 5.00-15 (4PR) | 7-16 (4PR) |
| Rear | 11.2-24 (4PR) | |
Rear track adjustable in 5 positions: 1,020 / 1,100 / 1,140 / 1,220 / 1,340 mm. Front track 2WD: 960 or 1,060 mm; 4WD: fixed at 1,050 mm. The specific tire pressures are not listed in this manual — use the value shown on the sidewall of your tire, or ask us for the correct advice for your tire size and use.
PTO
| Position | PTO speed | Engine speed |
|---|---|---|
| 1 | 540 rpm | 2,280 rpm |
| 2 | 1,000 rpm | 2,540 rpm |
Shaft: JIS 35, 6-spline. Clutch: multi-disc, hydraulic.
Hydraulics and lift
Hydraulically operated lift system, 3-point category I, with position control (draft control optional on M/P/S). Towing via drawbar.
Fluid capacities
| Component | Capacity | Type |
|---|---|---|
| Engine | 4.8 liters | Engine oil SAE 10W-30 (API CB or better) |
| Transmission housing | 34.5 liters | Transmission oil SAE 80 |
| Injection pump | 0.14 liters (140 cc) | Engine oil SAE 10W-30 |
| Radiator | 7 liters | Clean soft water + antifreeze if needed |
| Front axle (4WD) | 5 liters | Transmission oil SAE 80 or 90 |
| Power steering | 2 liters | Hydraulic oil |
Electrical
Battery: N70P, 12 V, 52 Ah. Specific gravity of fully charged electrolyte ±1.26 at 20 °C.
Model codes
2WD / 4WD; types M, P, and S feature (optional) draft control, of which M and S have a fully synchronized transmission. This manual does not specify the full meaning of all type letters; if you're unsure which version you have, check the type plate or let us verify it when ordering parts.
