Yanmar F195–FX265 specifications: all models at a glance
Looking for the Yanmar F195 specifications — or those of the FX215, F235 or FX265? Below you'll find the complete technical data for the entire New Super Forte series, straight from the original factory manual.
Suitable for the entire series: F195(D), FX195(D), F215(D), FX215(D), F235(D), FX235(D), F255(D), FX255(D), F265(D) and FX265(D).
Yanmar F195–FX265 engine specifications
| Model | Engine | Power | Cylinders | Bore × stroke | Displacement |
|---|---|---|---|---|---|
| F195 / FX195 | 3TNB80-RN | 19 hp / 2500 rpm | 3 | 80 × 88 mm | 1327 cc |
| F215 / FX215 | 3TNB82-RN | 21 hp / 2500 rpm | 3 | 82 × 88 mm | 1394 cc |
| F235 / FX235 | 3TNB84-RB | 23 hp / 2500 rpm | 3 | 84 × 88 mm | 1463 cc |
| F255 / FX255 | 3TNB84-RA | 25 hp / 2500 rpm | 3 | 84 × 88 mm | 1463 cc |
| F265 / FX265 | 3TNB84-RN | 26 hp / 2500 rpm | 3 | 84 × 88 mm | 1463 cc |
All models share the same basic equipment: water-cooled 3-cylinder diesel engine with Bosch injection pump, 25-litre fuel tank, engine oil capacity 4.0 litres, coolant 4.5 litres (plus 0.75 litre expansion tank), 12V–200W alternator, 12V–1.6kW starter motor, and a 12V–75Ah battery. The clutch is a dry single plate (diaphragm, 200 mm), the brakes are mechanical wet disc brakes, and the steering operates via a recirculating ball screw.
Yanmar F195–FX265 weights and dimensions
| Model | Weight 2WD / 4WD | L × W × H (mm) | Wheelbase | Ground clearance 2WD / 4WD |
|---|---|---|---|---|
| F195(D) | 800 / 860 kg | 2790 × 1180 × 1465 | 1490 mm | 330 / 280 mm |
| FX195(D) | 810 / 870 kg | 2790 × 1180 × 1465 | 1490 mm | 330 / 280 mm |
| F215(D) | 920 / 1005 kg | 2840 × 1240 × 1445 | 1510 / 1525 mm | 296 / 280 mm |
| FX215(D) | 930 / 1015 kg | 2840 × 1240 × 1445 | 1510 / 1525 mm | 296 / 280 mm |
| F235(D) | 940 / 1020 kg | 2840 × 1240 × 1475 | 1510 / 1525 mm | 322 / 295 mm |
| FX235(D) | 950 / 1030 kg | 2840 × 1240 × 1475 | 1510 / 1525 mm | 322 / 295 mm |
| F255(D) | 990 / 1065 kg | 2840 × 1320 × 1500 | 1510 / 1525 mm | 340 / 320 mm |
| FX255(D) | 1000 / 1075 kg | 2840 × 1320 × 1500 | 1510 / 1525 mm | 340 / 320 mm |
| F265(D) | 1020 / 1095 kg | 2865 × 1410 × 1520 | 1510 / 1525 mm | 360 / 320 mm |
| FX265(D) | 1030 / 1105 kg | 2865 × 1410 × 1520 | 1510 / 1525 mm | 360 / 320 mm |
Weights include the three-point linkage. Length is measured to the lower lift arms, height to the mirror.
Yanmar F195–FX265 tyres and track width
| Model | Front 2WD / 4WD | Rear | Rear track |
|---|---|---|---|
| F/FX195(D) | 4.00-12 / 6-12 | 8.3-24 | 940 – 1060 mm |
| F/FX215(D) | 4.00-12 / 6-14 | 9.5-22 | 970 – 1090 mm |
| F/FX235(D) | 4.00-15 / 7-14 | 9.5-24 | 970 – 1090 mm |
| F/FX255(D) | 5.00-15 / 7-16 | 11.2-24 | 1020 – 1320 mm (4 positions) |
| F/FX265(D) | 5.00-15 / 7-16 | 12.4-24 | 1075 – 1375 mm (4 positions) |
Yanmar F195–FX265 travel speeds and transmission
All models have 9 forward gears and 3 reverse gears (3 main gears × 3 ranges), optionally extended with a creep gearbox. The difference: the F models shift conventionally with a clutch, the FX models have powershift on the main gear selection.
| Model | Forward (km/h) | Reverse (km/h) | Top speed |
|---|---|---|---|
| F/FX195 | 1.16 – 14.27 | 1.50 – 9.26 | 14.27 km/h |
| F215 | 0.82 – 14.62 | 1.14 – 10.11 | 14.62 km/h |
| FX215 | 0.80 – 14.62 | 1.14 – 10.11 | 14.62 km/h |
| F235 | 0.80 – 14.31 | 1.11 – 9.89 | 14.31 km/h |
| FX235 | 0.78 – 14.31 | 1.11 – 9.89 | 14.31 km/h |
| F255 | 0.83 – 14.81 | 1.15 – 10.24 | 14.81 km/h |
| FX255 | 0.81 – 14.81 | 1.15 – 10.24 | 14.81 km/h |
| F265 | 0.83 – 14.69 | 1.14 – 10.16 | 14.69 km/h |
| FX265 | 0.80 – 14.69 | 1.20 – 10.16 | 14.69 km/h |
With the optional creep gearbox, the lowest speed drops to 0.13 km/h (F/FX195: 0.20 km/h) — handy for planting work and rotary tilling.
Yanmar F195–FX265 PTO and lift system
| Model | PTO settings | PTO speeds (rpm) | Lift | Standard rotary |
|---|---|---|---|---|
| F/FX195(D) | 3 | 571 / 785 / 1209 | 3-point JIS type 0 | RSB-1302, RCB-1302 |
| F/FX215(D) | 4 | 574 / 698 / 958 / 1293 | 3-point JIS type 1 | RSB-1402, RCB-1502 |
| F/FX235(D) | 4 | 574 / 698 / 958 / 1293 | 3-point JIS type 1 | RSB-1402, RCB-1502 |
| F/FX255(D) | 4 | 574 / 698 / 958 / 1293 | 3-point JIS type 1 | RSB-1502, RCB-1502 |
| F/FX265(D) | 4 | 574 / 698 / 958 / 1293 | 3-point JIS type 1 | RSB-1502, RCB-1502 |
The PTO shaft has a shaft size of 35 mm (JIS). All models have hydraulic position control; depending on the version, supplemented with auto-rotary depth control or the electronic OK-UFO automatic system. PTO power was never officially published; as a guideline, expect around 85–90% of engine power.
💡 Product tip: working on repairs based on these specs? We have the right head gasket for the 3TNB84 engines (F235–FX265), 3TNB82 (F/FX215) and 3TNB80 (F/FX195) in stock, as well as 80 mm piston rings for the F195.
