-
Chassis26 Products -
Clutch / transmission15 Products -
Cooling & radiators7 Products -
Electrical parts7 Products -
Engine parts46 Products -
Filters7 Products -
Oil11 Products
Thumbnail image
Product
Price
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- Length 80 mm
- Wire diameter : 10mm
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical specifications:
- Voltage: 12 V
- Power: 1.4 kW
- Flange diameter: 66.0 mm
- Oil pressure switch suitable for many models, including:
- Kubota
- A13, A14, A15, A17, A19, A30, A155, A175, A195
- B1550, B1700DT, B1750, B1830, B2100, B2150, B2310, B2320DT, B2400, B2410, B2601HSD, B2620, B2630, B2650, B2710, B2910, B2920, B3000, B3030, , B3300, B3350, B4200, B4850DT, B6200HST, B7200, B7300, B7500, B7410, B7510, B7610, B7800, B8200, B9200
- B20, B21, B26
- Oil Seal - oil seal suitable for the front axle in the tractors shown below. With great care, the models at this seal were sought!
- Technical data
- 35х52х12
- Iseki
- TX145, TX155, TX1000, TX1210, TX1300, TX1410, TX1500, TX1510, TX2140, TX2160
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
- Exclusive from our own production line: a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for installation ("Plug & Play").
- We guarantee perfect atomization and opening pressure, so you don't have to overhaul or test the fuel injector yourself. Remove the old one, install the new one.
- Advice from experience: If one fuel injector fails, the others are often worn out as well. For smooth engine running, we recommend replacing them as a set. Don't forget to order the flame plates and copper sealing rings!
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard. This lets you get started safely and leak-free right away. The set includes:
- A new heat shield (sealing washer) against extreme heat and carbon buildup.
- ✅ With thermostat gasket
- Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
Showing 12 of 100 products
