-
Chassis285 Products -
Clutch / transmission277 Products -
Cooling & radiators243 Products -
Electrical parts168 Products -
Engine parts1359 Products -
Filters260 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- Length 80 mm
- Wire diameter : 10mm
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Exclusive from our own production line: a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for installation ("Plug & Play").
- We guarantee perfect atomization and opening pressure, so you don't have to overhaul or test the fuel injector yourself. Remove the old one, install the new one.
- Advice from experience: If one fuel injector fails, the others are often worn out as well. For smooth engine running, we recommend replacing them as a set. Don't forget to order the flame plates and copper sealing rings!
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard. This lets you get started safely and leak-free right away. The set includes:
- A new heat shield (sealing washer) against extreme heat and carbon buildup.
- Return line suitable for:
- Kubota
- Kubota A-15, A-155, B1700, BX2200
- B1700, BX2200, BX2660, BX2670, BX2680
- B2100, B2110, B2301, B2320
- Fuel filter for the following models
- Antonio Carraro
- COUNTRY 4400, TTR 4400 CON ARCO, TTR 4400 CON ARCO II SERIES, TTR 4400 CON TELAIO, TTR 4400 CON TELAIO II SERIES, TTR 4400 4WS, TGF 7800, TRX 7800
- TIGRE 3800 F, TIGRE 4400 F, TIGRE 4000, T 5800 Jona, SN 5800 V Major, TC 5800F Major, TN 5800 Major.
- ATLAS COPCO
- Premium quality Air filter
- Sizes:
- Outside diameter: 102mm
- Inner diameter: 66mm
- Diameter metal connection: 146mm
- The dynamo is delivered by a certified supplier and fully tested. The compatible models are selected with great care!
- Technical data
- Voltage (V) 12
- Amperage (A) 40
- Freewheel pulley No
- Injector / atomizer nozzle suitable for:
- Kubota engine
- D722, D782, D902, Z482
- D902, D902EBH
- D722, D722EBH, D772B, D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1, D722-E4
- Suitable for: Kubota A-17, A-175 and Kubota D1005 engine
- Filter Kit | maintenance set suitable for:
- Very important! This set includes a sump plug copper seal. The oil sump plug seal is often forgotten, which causes oil leakage. It must always be replaced!
- Consisting of:
- Air filter
- Outside diameter: 105mm
Showing 12 of 25 products
