-
Chassis308 Products -
Clutch / transmission279 Products -
Cooling & radiators246 Products -
Electrical parts176 Products -
Engine parts1384 Products -
Filters260 Products -
Oil11 Products -
Uncategorized4 Products
Thumbnail image
Product
Price
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- The piston rings are of high European quality and compatible models have been sought with great care:
- Kubota
- A-13, A-14
- B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
- G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
- Strong, durable fastener for the cylinder head of your Kubota engine.
- This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
- Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
- ? Technical data:
- ✔️ Application: Z402, Z482, Z602 and related variants
- Snel Parts water pump with gasket for Kubota Z482, Z602, D722, and D902 engines. Suitable for Kubota, Avant, Bobcat, Takeuchi, Komatsu, Schäffer, and more. Note: always check your OEM number for the correct fit.
- Head gasket for the Kubota Z482 engine (67 mm bore). Suitable for T1600H, B1220, GL7000, GR1600, and Aixam, among others. OEM: 16851-03310.
- Suitable for Kubota Z482
- This valve spring is of high quality and suitable for our cylinder heads.
- Kubota engine
- Z400-Z402, Z482, Z602
- D662, D662-E D662-EB D662-E2B, 3D64
- D722, D722EBH, D772B, D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1, D722-E4
- Direct OEM replacement (ref. 16853-99355) — complete gasket kit for Kubota Z482. Fits Kubota T1600H, GL7000, Avant 314 and Mariner.
- This complete overhaul set consists of:
- Complete package with gaskets for; head gasket (set), crankshaft bearing , valve stem seals , exhaust gaskets , inlet gaskets , seals and other gaskets as in the photo.
- 2 complete pistons + piston rings
- General bearing kit with; Connecting rod bearings STD and main bearings STD.
- Bore: 67mm
- This concerns a new cylinder head produced from high-quality material. Valve seats are already mounted and ready for use. The compatible models below have been carefully matched with the cylinder head!!
- The cylinder head is suitable for:
- Kubota Engine
- Z482-E2-GX, Z482-E, Z482-D25, Z482-B-SEC, Z482 – 60 Hz
- Kubota
- Oil pump suitable for the following models:
- Kubota engine
- Z482
- D722, D782, D902
- Z482-E2-GX, Z482-E, Z482-D25, Z482-B-SEC, Z482 – 60 Hz
Showing 12 of 13 products
