-
Chassis308 Products -
Clutch / transmission279 Products -
Cooling & radiators247 Products -
Electrical parts213 Products -
Engine parts1413 Products -
Filters274 Products -
Oil11 Products -
Uncategorized4 Products
Thumbnail image
Product
Price
- Please note: this is the M10 version (M10 x 1.25).
- For the Iseki TX1300, Mitsubishi D1300 and MT1301, Satoh S370 and ST1300 and Noda NR1301 with KE70 engine, there are two versions. Check this before ordering:
- Chassis number from 16016 or engine number KE70 from 2765: this is the correct glow plug.
- Chassis number 1 to 16015 or engine number KE70 1 to 2764: you need the M12 version.
- To the M12 version →
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- ✅ With thermostat gasket
- verified quality
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Strong, durable fastener for the cylinder head of your Kubota engine.
- This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
- Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
- ? Technical data:
- ✔️ Application: Z402, Z482, Z602 and related variants
- The piston rings are of high European quality and compatible models have been sought with great care:
- Kubota
- A-13, A-14
- B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
- G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
- Snel Parts water pump with gasket for Kubota Z482, Z602, D722, and D902 engines. Suitable for Kubota, Avant, Bobcat, Takeuchi, Komatsu, Schäffer, and more. Note: always check your OEM number for the correct fit.
- Injector / atomizer nozzle suitable for:
- Kubota engine
- D722, D782, D902, Z482
- D902, D902EBH
- D722, D722EBH, D772B, D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1, D722-E4
- Snel Parts premium quality. Manufactured in our own factory, allowing us to guarantee the quality ourselves. The copper windings are heavier than usual in the aftermarket segment and withstand prolonged and frequent starting better. Supplied in the Snel Parts box.
- Starter motor of Premium quality suitable for:
- Mitsubishi Engine
- S4L, S4L2
- S4L-Y262KL, S4L2-Y263KL, S4Q2-Y262KL
- Glow candle / Glow plug of premium quality suitable for:
- Technical data
- Length 119mm
- Thread M10 x 1.25mm
- Kubota
Showing 12 of 75 products
