-
Chassis285 Products -
Clutch / transmission277 Products -
Cooling & radiators243 Products -
Electrical parts168 Products -
Engine parts1359 Products -
Filters260 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Exclusive from our own production line: a complete Fuel Injector combination, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- This is the Fuel Injector for the popular Mitsubishi L-series (e.g. L3E) and S-series (e.g. S3L2, S4L2) diesel engines. These engines are the beating heart of countless mini excavators, compact tractors, and generators.
- Advice from experience: These Fuel Injectors are often exposed to varying loads and long periods of inactivity (especially in boats and generators).
- Preferably replace them as a set for smooth operation.
- Note: This injector holder features screw thread for a secure and reliable mounting. Ensure that the thread and the seat in the cylinder head are spotless, and always use a new heat shield washer!
- The piston rings are of high-quality European manufacture and the compatible models have been researched with great care:
- Size: 76mm x 2,00 x 2,00 x3,00
- Mitsubishi engine
- L2E-31MR, L2E-61ES, L2E-61SDH, L2E-61WH
- MVL3E, L3E, L3E2, L3E2-65ESB
- Exclusive from our own production line: a high-quality fuel injector nozzle that meets the strictest tolerances. This 'Snelparts' injector tip is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality such as well-known brands in this industry!
- technical specifications
- Opening pressure (setting value): approx. 120 – 130 Bar (12.0 – 13.0 MPa)
- This head gasket is of high quality and the compatible models have been selected with great care!
- Mitsubishi engine
- L2E-31MR, L2E-61ES, L2E-61SDH, L2E-61WH, L2E
- AMI Generator Set
- GS 0007 M 32S
- High quality Water pump suitable for the following models
- Mitsubishi engine
- MVL3E, L3E, L3E2-65ESB
- L3E, L3E-SD, L3E-SDH, L3E-61SD, L3E-61SDH, L3E-W262KL, L3E-W462KL, L3E-6ACAM, L3E-W461DPP Tier 4 Final, L3E-31NS, L3E-31NSA
- L3E-W231NSA, L3E-W431NSA, L3E-61HMG, L3E-W231KBS, L3E-61R, L3E-31KS, L3E-31NCN, L3E-W231KBS, L3E-W431KBS, L3E-W462KL, L3E-62KL, L3E-W462KLY, L3E-63ES
- Starter motor suitable for:
- Technical information:
- Teeth: 15
- Total length: 225mm
- Voltage (Volt): 12
- Stop solenoid | Solenoid | fuel pump shutoff suitable for:
- Iseki
- Tu120, TU130, TU140, TU150, TU160, TU170
- TU125, TU135, TU145, TU155, TU165, TU167
- TU147, TU157, TU167, TU177
- Sump Plug Washer / Seal 14 mm (Mitsubishi Industrial | Lombardini)
- High-quality copper seal washer for the oil drain plug. Specifically suitable for Mitsubishi Industrial engines (L-series & S-series) used in microcars, mini excavators, and tractors.
- This seal washer guarantees a perfect seal for the oil sump. During maintenance of industrial diesel engines and microcars, it is essential to replace this washer preventatively to prevent oil leakage and pressure loss. The washer conforms to the mating surface of the oil sump for a hermetic seal.
- Product Specifications
- Inner Diameter: 14 mm
- Fuel filter suitable for the following models
- Thread connection: 3/4-16UNF
- Diameter: 83mm
- DYNAPAC
- CC1000, CC800, CC800, CC900 S
- Connecting rod produced from high-quality material, and the compatible models have been carefully researched!
- Technical data
- 21mm piston pin diameter
- 18mm piston pin diameter
- Mitsubishi engine
- ✅ intake valve | For Mitsubishi L2E, L3E, L3A & L3C diesel engines
- Reliable valve operation – essential for correct combustion and engine performance.
- This intake valve is suitable for various Mitsubishi diesel engines from the L2 and L3 series. Widely used in compact tractors, excavators, generators and industrial applications.
- ✔️ Why this intake valve?
- ✔️ OEM-compliant dimensions for Mitsubishi diesel engines
- Cylinder Liner suitable for Mitsubishi L2E and L3E engine
- Size (unfinished)
- Suitable for standard size and oversized piston.
- Internal dimensions: 75mm
- External dimensions: 79.5mm
Showing 12 of 17 products
