Crankshaft Kit Kubota V1505 – V1505 | V1505D | V1505T | Bobcat | Giant | Schäffer

Description

With this crankshaft kit you replace the crankshaft of the Kubota V1505 four-cylinder diesel engine completely in one go. As soon as the crankshaft comes out, the bearings, oil seals, and crankcase are exposed — and anything you don't replace at that time means having to disassemble it all over again later. Therefore, this kit includes not only the crankshaft, but also the main bearings, connecting rod bearings, thrust washers, new connecting rod bolts, and the complete gasket set including both crankshaft oil seals.

✔️ Complete bearing package — main bearings, connecting rod bearings, and thrust washers in standard size
✔️ Includes complete gasket set with both crankshaft oil seals, oil pan, and timing cover gasket
✔️ New connecting rod bolts — these should not be reused after an overhaul

Kit contents

• 1× crankshaft Kubota V1505 — standard size (STD)
• 1× main bearing set — standard size (STD)
• 4× connecting rod bearing / bearing shell — STD
• 1× thrust bearing set (washers)
• 8× connecting rod bolt
• 1× complete gasket set — incl. head gasket, oil pan gasket, timing cover gasket, and front + rear crankshaft oil seal

Technical specifications

• Engine: Kubota V1505 (also V1505D, V1505-T, V1505B)
• Cylinders: 4
• Bearing size: standard (STD) — the crankshaft is at standard size, so the supplied bearings are STD
• Connecting rod bolt tightening torque: 53.9 – 58.8 Nm (5.5 – 6.0 kgf·m)

Please note: always replace connecting rod bolts completely and never reuse old bolts. Check bearing clearance during installation according to factory specifications. If the old crankshaft has already been ground or the journals are undersized, please contact us — in that case, you will need undersized bearings instead of this kit.

Tip: the cause of crankshaft damage is almost always oil shortage or contaminated oil. Check the oil pump and oil channels before installing the new shaft — a new crankshaft on a worn oil pump will not last long.

Suitable for

Kubota

• B2910HSD, B3000HSDCC, B3030HSD, B3150HSD, B3150HSDCC, B3150SUHSD, B3350HSD, B3350HSDC, B3350HSDCC, B3350SUHSD, B7800HSD
• KX027-4, KX030-4, KX61-3, KX71-2, KX71-2A, KX71-2G, KX71-3, KX71-3S
• RT270, RT270D, RT280, RT280D

Bobcat

• 425, 428, S100, S100-BCZ

Schäffer

• 2336, 2336 SLT, 2345, 2345 SLT, 2436, 2436 SLT, 2445, 2445 SLT, 2445 T
• 3036, 3036e, 3036 SLT, 3038, 3038e, 3038 SLT, 3045, 3045e, 3045 SLT
• 4048, 4048e, 4050, 4050 T, 4050 Z, 4050 ZL, 4050 ZL T, 5050, 5050 T, 5060, 5060 T
• 660 T, 668 T, 861 T, 963 T, 964 T

Giant

• V361-S040, V361-S068, V362, 3648, V45 Tele, V45 Tele-AS
• V451T, V451T ECO, V451T X-tra, V452T, V452T HD, V452T X-tra, V452T X-tra HD
• V4501T, V4502T, V4502T Tele, V4502T X-tra

Avant

• R35, 635, 640

Eurotrac

• W12 K36

JCB

• 403

Aichi

• FR300

OEM for reference

• 16282-23013, 1628223013, 16421-23014, 1642123014 — crankshaft
• 16292-23480, 1629223480 — main bearing set
• 16241-22310, 1624122310 — connecting rod bearing
• 19202-23540, 1920223540 — thrust bearing set
• 16241-22142, 1624122142 — connecting rod bolt
• 16292-03310, 1629203310 — complete gasket set
• 1G089-99352, 1G08999352 — upper gasket set
• 1G089-99365, 1G08999365 — lower gasket set