Skip to content

Kubota BX1880 parts

Showing 12 of 85 products
Thumbnail image
SKU
Product
Rating
Price
In stock
Fits your Kubota BX1880
SKU-55002-2
  • Glow Plug Premium Quality (M8)
  • Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
  • Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
  • ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
  • ✔️ High-Quality Finish: Durable materials for a long service life
In stock
Universal product
SKU-14002
  • Towbar bracket CAT1. for your mini tractor!
  • Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
  • Iseki
  • Kubota
  • Yanmar
Out of stock
Fits your Kubota BX1880
SKU-96026
  • Oil Seal - oil seal suitable for the front axle in the tractors shown below. With great care, the models at this seal were sought!
  • Technical data
  • 35х52х12
  • Iseki
  • TX145, TX155, TX1000, TX1210, TX1300, TX1410, TX1500, TX1510, TX2140, TX2160
In stock
Fits your Kubota BX1880
SKU-47019-s
  • Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
  • Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
  • Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
  • With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
  • Don't forget to replace the copper washer under the fuel injector (this seals against compression).
In stock
Universal product
VAR-900001
  • Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
In stock
Fits your Kubota BX1880
In stock
Fits your Kubota BX1880
SKU-45008
  • ✅ With thermostat gasket
In stock
Universal product
VAR-0004
  • Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
In stock
Fits your Kubota BX1880
VAR-0044
  • The piston rings are of high European quality and compatible models have been sought with great care:
  • Kubota
  • A-13, A-14
  • B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
  • G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
In stock
Fits your Kubota BX1880
SKU-780012
  • Strong, durable fastener for the cylinder head of your Kubota engine.
  • This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
  • Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
  • ? Technical data:
  • ✔️ Application: Z402, Z482, Z602 and related variants
In stock
Universal product
SKU-150010
  • Replacement fuel filter – complete filter housing for mini tractors
  • Give your mini tractor a second wind with this replacement fuel filter housing , specially designed as a simple and reliable solution for leaks, cracks or worn parts. Whether you are dealing with a leaking drain tap, a damaged filter element or a torn filter basket - this complete filter housing offers an immediate solution.
  • ✅ Suitable for various brands , including Kubota, Iseki, Yanmar and more
  • ✅ Supplied complete with connections – easy to install
  • ✅ Universally applicable – in some cases slight adjustment is necessary
In stock
Fits your Kubota BX1880
SKU-40722
  • Snel Parts water pump with gasket for Kubota Z482, Z602, D722, and D902 engines. Suitable for Kubota, Avant, Bobcat, Takeuchi, Komatsu, Schäffer, and more. Note: always check your OEM number for the correct fit.
Showing 12 of 85 products
Menu
Currency
Need help?
Contact us