Looking for Holder C30 parts? Browse our complete range of compatible spare and maintenance parts for the Holder C30 mini tractor—including filters, engine parts, cooling, electrical, and hydraulic components—available directly from stock for fast worldwide delivery.
-
Chassis22 Products -
Clutch / transmission10 Products -
Cooling & radiators1 Product -
Electrical parts2 Products -
Engine parts6 Products -
Filters5 Products -
Oil11 Products
- We only work with high-quality oil filters from German or other European suppliers!
- Thread: M20x1.5
- Diameter: 80.0 mm
- Height: 80mm
- Below is the listing that we have meticulously selected from our suppliers. If the machine is listed below then it fits 100%.
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- Technical specifications:
- Outer diameter: 29 mm
- Inner diameter: 13 mm
- Length: 84 mm
- Fuel filter available for:
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
Hydraulic pump Kubota B1200 - B7100 | B1-10 | B1-17
- Direction of rotation: Clockwise
- Replacement fuel filter: complete filter housing for compact tractors
- Give your compact tractor a new lease on life with this replacement fuel filter housing, specially designed as a simple and reliable solution for leaks, cracks, or worn parts. Whether you are dealing with a leaking drain cock, a damaged filter element, or a cracked filter bowl: this complete filter housing provides an immediate solution. Suitable for various brands, including Kubota, Iseki, and Yanmar. Supplied complete with connections and easy to install; in some cases, minor modification is required.
- Technical specifications:
- Length: 115 mm
- Filter element diameter: 38.5 mm
- Seat suitable for Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Satoh, Suzue,
- Parts for your mini tractor often do not contain all the gaskets. The solution for this is a liquid gasket that seals the part and prevents leakage. Black Gasket Maker is a flexible, waterproof filler and adhesive, resistant to high temperatures. It is a polysiloxane based product in a pressure cartridge to quickly and easily make seals and gaskets. Characteristics
- Resistant to oils, transmission oils, water, antifreeze, grease, smoke and hot toxic gases.
- Replaces cork, felt, paper and rubber gaskets.
- Resistant to low temperatures down to -40°C (continuous) and to high temperatures up to 232°C (continuous) and 300°C (short-term).
- Is harmless to electronic sensors and catalytic converters.
- Suitable for any compact tractor. If you have a leaking fuel filter element tap or a crack in the filter bowl, this can provide a simple solution.
- Technical specifications:
- Outer diameter: 55 mm
- Total height: 98 mm
- Housing height: 83 mm
- Universal joint 20x54.8 mm for overhaul of 4WD intermediate shaft / propshaft. Incl. circlips.
- Lift Arm Stabilizer suitable for all mini tractors
- Option 1:
- Mainly focused on the Kubota lift set:
- working length: minimum 430MM mm.
- working length: maximum 500MM mm.
Holder C30 Parts & Maintenance
Maintaining or repairing your Holder C30 mini tractor starts with parts that fit accurately. On this page you will find all compatible Holder C30 spare parts—from oil, fuel, and air filters to water pumps, radiator hoses, clutches, brakes, front axle seals, three-point linkage parts, and electrical components. Use the category filter to quickly jump to the exact assembly for your Holder C30.
Looking for parts for another Holder model? View our complete range of Holder mini tractor parts or contact our team for expert support.
