-
Chassis285 Products -
Clutch / transmission277 Products -
Cooling & radiators239 Products -
Electrical parts164 Products -
Engine parts1357 Products -
Filters260 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Connecting Rod suitable for the following models and engines:
- Case
- CX31B, CX36B
- Cub Cadet
- EX2900, EX3200, SX3100
- Valve stem seal (valve seal/valve stem rubber) for Yanmar 3TNV88 and the complete 3TNE/3TNV/4TNE/4TNV series. Seals the valve stem against oil leakage. Sold individually.
- This valve spring is of high quality and suitable for our cylinder heads.
- Engine
- 4TNV88
- Engine information: 4 Cylinder
- Bore : 3.46 in (88.00 mm)
- Fuel Shut Off Solenoid / Stop Solenoid 12 Volt (3-pin) Has your machine suddenly stalled or does it no longer start because it is not getting fuel? Often a faulty stop solenoid is the cause.
- Technical specifications
- Voltage: 12V
- Connection: 3-pin connector (with wiring harness)
- Mounting: Flange mounting on the fuel pump (near the regulator)
- Complete Fuel Injector for Yanmar 3TNV88 / 4TNV88 (729604-53100)
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and set to the correct opening pressure. This ‘Snelparts‘ injector is ready for installation (“Plug & Play”).
- NOTE FOR DIRECT INJECTION! Check the OE number: 729645-53100; there is also SKU-47063 = 729604-53100.
- Although they look identical on the outside and both fit the 3TNV88 and 4TNV88 engine blocks, the crucial difference lies inside the nozzle (injector tip):
- 729604-53100 uses the DLLA156P175 nozzle. This has a spray angle of 156 degrees.
- Complete Fuel Injector for Yanmar 3TNV88 / 4TNV88 (729604-53100)
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and set to the correct opening pressure. This ‘Snelparts‘ injector is ready for installation (“Plug & Play”).
- NOTE FOR DIRECT INJECTION! Check the OE number: 729604-53100; there is also SKU-47064 = 729645-53100.
- Although they look identical on the outside and both fit the 3TNV88 and 4TNV88 engine blocks, the crucial difference lies inside in the nozzle (injector tip):
- 729604-53100 uses the DLLA156P175 nozzle. It has a spray angle of 156 degrees.
- Description: High-quality Intake Valve suitable for overhauling Yanmar 84 and 88 series diesel engines.
- Specifications:
- Head diameter: 36.0 mm
- Stem diameter: 8.0 mm
- Length: 109.0 mm
- High-quality exhaust valve suitable for overhauling Yanmar 84 and 88 series diesel engines. These engines are widely used in mini excavators from Yanmar, Komatsu and Takeuchi, among others.
- Specifications:
- Head diameter: 30.0 mm
- Stem diameter: 8.0 mm
- Length: 109.0 mm
- Fuel filter for a wide range of compact excavators, wheel loaders, aerial platforms, and compact tractors from brands including Yanmar, Bobcat, Komatsu, Hitachi, Kobelco, Takeuchi, TYM, and John Deere. Direct replacement for the original.
- Exclusive to our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' nozzle was developed as a superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in various Yanmar and Komatsu applications.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern and exact seal
- ✔️ Produced to the strictest OEM tolerances
- ✔️ Results in cleaner combustion and a smoother running engine
- Yanmar cylinderhead suitable for:
- Yanmar:
- 4TNV84
- 4TNV84T
- Komatsu
