Skip to content

Schaeff HR10 parts

Showing 12 of 60 products
Thumbnail image
SKU
Product
Rating
Price
In stock
Universal product
SKU-14002
  • Towbar bracket CAT1. for your mini tractor!
  • Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
  • Iseki
  • Kubota
  • Yanmar
In stock
Universal product
VAR-900001
  • Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
In stock
Universal product
SKU-150010
  • Replacement fuel filter: complete filter housing for compact tractors
  • Give your compact tractor a new lease on life with this replacement fuel filter housing, specially designed as a simple and reliable solution for leaks, cracks, or worn parts. Whether you are dealing with a leaking drain cock, a damaged filter element, or a cracked filter bowl: this complete filter housing provides an immediate solution. Suitable for various brands, including Kubota, Iseki, and Yanmar. Supplied complete with connections and easy to install; in some cases, minor modification is required.
  • Technical specifications:
  • Length: 115 mm
  • Filter element diameter: 38.5 mm
Out of stock
Universal product
Out of stock
Universal product
SKU-42005
  • Seat suitable for Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Satoh, Suzue,
In stock
Universal product
VAR-0093
  • Parts for your mini tractor often do not contain all the gaskets. The solution for this is a liquid gasket that seals the part and prevents leakage. Black Gasket Maker is a flexible, waterproof filler and adhesive, resistant to high temperatures. It is a polysiloxane based product in a pressure cartridge to quickly and easily make seals and gaskets. Characteristics
  • Resistant to oils, transmission oils, water, antifreeze, grease, smoke and hot toxic gases.
  • Replaces cork, felt, paper and rubber gaskets.
  • Resistant to low temperatures down to -40°C (continuous) and to high temperatures up to 232°C (continuous) and 300°C (short-term).
  • Is harmless to electronic sensors and catalytic converters.
In stock
Universal product
SKU-150010-1
  • Suitable for any compact tractor. If you have a leaking fuel filter element tap or a crack in the filter bowl, this can provide a simple solution.
  • Technical specifications:
  • Outer diameter: 55 mm
  • Total height: 98 mm
  • Housing height: 83 mm
In stock
Universal product
SKU-35004-5
  • U-joint cross 20x54.8 mm for overhauling the 4WD PTO drive shaft / drive shaft. Includes snap rings.
In stock
Universal product
VAR-0167
  • Lift Arm Stabilizer suitable for all mini tractors
  • Option 1:
  • Mainly focused on the Kubota lift set:
  • working length: minimum 430MM mm.
  • working length: maximum 500MM mm.
Out of stock
Universal product
SKU-42010
  • Seat suitable for Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Satoh, Suzue,
In stock
Fits your Schaeff HR10
SKU-1200011
  • Snel Parts premium quality. Manufactured in our own factory so we can guarantee the quality ourselves. The copper windings are heavier than usual in the aftermarket segment and better withstand prolonged loads and high charging currents. Delivered in the Snel Parts box.
  • Alternator of Premium quality suitable for the following tractors of the brand Iseki
  • Technical data
  • Voltage 12
  • Amperage 35
In stock
Fits your Schaeff HR10
SKU-1290015
  • Snel Parts premium quality. Manufactured in our own factory, allowing us to guarantee the quality ourselves. The copper windings are heavier than usual in the aftermarket segment and withstand prolonged and frequent starting better. Supplied in the Snel Parts box.
  • Starter motor of Premium quality suitable for:
  • Mitsubishi Engine
  • S4L, S4L2
  • S4L-Y262KL, S4L2-Y263KL, S4Q2-Y262KL
Showing 12 of 60 products
Menu
Currency
Need help?
Contact us