-
Chassis285 Products -
Clutch / transmission277 Products -
Cooling & radiators243 Products -
Electrical parts168 Products -
Engine parts1359 Products -
Filters260 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Glow candle / Glow plug of premium quality suitable for:
- Kubota engine
- D1403, D1503, D1703, D1803
- V1903, V2003, V2203, V2403
- V3300, V3600, V3800
- This water pump is now part of our own Snel Parts line and comes in the recognizable red and black Snel Parts branded packaging. A 1-to-1 replacement for the original water pump in the Kubota D and V engine series, carefully checked and including the corresponding mounting gasket.
- The Kubota V2203 M-DI engine requires a different pump — check our collection for the correct version.
- ✔️ Delivered in Snel Parts branded packaging — individually checked and securely packed
- ✔️ Includes corresponding gasket — ready to mount without extra purchases
- ✔️ Exact OEM fit for Kubota D1102, D1302, D1402, D1703 and V1502-V2203
- Fuel Injector Mounting Kit - Kubota (05 / 03 / Super Mini Series)
- Complete 3-piece set for leak-free mounting of a fuel injector. Prevent compression loss and always replace these rings during installation.
- Please note: order set per cylinder; so 3 cylinders, order 3x.
- Contents & OEM numbers for reference:
- 19077-53650: Heat Shield - 6215-315-006-00
- Fuel filter for the following models
- Antonio Carraro
- COUNTRY 4400, TTR 4400 CON ARCO, TTR 4400 CON ARCO II SERIES, TTR 4400 CON TELAIO, TTR 4400 CON TELAIO II SERIES, TTR 4400 4WS, TGF 7800, TRX 7800
- TIGRE 3800 F, TIGRE 4400 F, TIGRE 4000, T 5800 Jona, SN 5800 V Major, TC 5800F Major, TN 5800 Major.
- ATLAS COPCO
- Exclusively from our own production line:</> a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- advice from experience: Don't go for cheaper alternatives; extensive research has been done into OEM quality. PLEASE NOTE: This fuel injector is specifically for engines with Indirect Injection (IDI).
- Does your engine have Direct Injection (DI)? (Often recognizable by thinner "pencil fuel injectors"). Then this fuel injector will not fit. This holder has a thick housing (approx. 20-25mm).
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard, so you can get to work safely and leak-free. The included set consists of:
- The dynamo is delivered by a certified supplier and fully tested. The compatible models are selected with great care!
- Technical data
- Voltage (V) 12
- Amperage (A) 40
- Freewheel pulley No
- We only work with high-quality oil filters from German or other European suppliers!
- Thread: (G)3/4 16 UNF
- Diameter: 95.0 mm
- Height: 89mm
- Below is the listing that we have meticulously selected from our suppliers. If the machine is listed below then it fits 100%.
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical data:
- Voltage: 12V
- Kilowatt:1.4
- Number of teeth: 9
- Ignition key suitable for various Kubota models. This has been selected with great care to find the compatible models with it!
- Kubota
- K008, K008-3
- KX91-2, KX101, KX121-2, KX151, KX161-2, KX41H
- R310, R310B
- Oil pressure switch suitable for:
- Kubota
- G5500, GL3500, GL6500
- SQ1140, SQ1200, SQ3170, SQ3250, SQ3350
- M4950, M5040, M5140, M5500, M5640, M5950, M6030, M6040, M6800, M6950, M7030, M7040DT, M7500, M7950, M8030, M8200, M8540, M8950, M9000, M9540
- High-quality copper seal ring for the oil drain plug | motor oil drain plug Specifically suitable for Iseki tractors and various Bolens machines.
- This seal washer guarantees a perfect seal for the oil sump. During maintenance of industrial diesel engines and microcars, it is essential to replace this washer preventatively to prevent oil leakage and pressure loss. The washer conforms to the mating surface of the oil sump for a hermetic seal.
- Product Specifications
- Material: Copper (Solid)
- Type: Flat seal ring (Gasket)
- Connecting Rod Bolt suitable for the following Kubota models
- Kubota
- GV-1125Q-60-KTC, GV-3170(SW), GV-3190Q-60, GV-3240, GV-3240SW, GV-3250Q-60-SW, GV3120-60-B, KH-1 10, KH-101, KH-151, KH-170L, KH-18(L), KH-191, KH-28L, KH-60(H), KH-66/H KCL, KH-90(H), KH-91/H, KJ-S130D-USA
- KJ-S130DX-USA, KJ-S150V-USA, KJ-S150VX-USA, KJ-T210V-USA, KJ-T210VX-USA, KJ-T270F-SW-USA, KJ-T270FX-SW-USA
- KX033-4, KX040-4, KX040-5, KX057-4, KX057-4 ACCESSORY, KX057-5, KX101, KX121-2, KX121-2(S SERIES), KX121-3, KX121-3S, KX121-3ST, KX151, KX161-2, KX161-2(S SERIES), KX161-3, KX161-3S, KX161-3ST, KX91-3, KX91-3S, KX91-3S2
Showing 12 of 29 products
