-
Chassis308 Products -
Clutch / transmission279 Products -
Cooling & radiators247 Products -
Electrical parts176 Products -
Engine parts1408 Products -
Filters260 Products -
Oil11 Products -
Uncategorized4 Products
Thumbnail image
Product
Price
- V-belt with designation 950 x 9.7 x 8 mm (narrow profile 9.7 x 8 mm, length 950 mm). For Iseki TU and TF models, Bolens G/H/TX, the Kubota A and B series and Mitsubishi MT, ST and D models. Reference numbers include 5650-040-930-50 and MD409305.
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical specifications:
- Voltage: 12 V
- Power: 1.4 kW
- Flange diameter: 66.0 mm
- Oil pressure switch suitable for many models, including:
- Kubota
- A13, A14, A15, A17, A19, A30, A155, A175, A195
- B1550, B1700DT, B1750, B1830, B2100, B2150, B2310, B2320DT, B2400, B2410, B2601HSD, B2620, B2630, B2650, B2710, B2910, B2920, B3000, B3030, , B3300, B3350, B4200, B4850DT, B6200HST, B7200, B7300, B7500, B7410, B7510, B7610, B7800, B8200, B9200
- B20, B21, B26
- Exclusive from our own production line: a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for installation ("Plug & Play").
- We guarantee perfect atomization and opening pressure, so you don't have to overhaul or test the fuel injector yourself. Remove the old one, install the new one.
- Advice from experience: If one fuel injector fails, the others are often worn out as well. For smooth engine running, we recommend replacing them as a set. Don't forget to order the flame plates and copper sealing rings!
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard. This lets you get started safely and leak-free right away. The set includes:
- A new heat shield (sealing washer) against extreme heat and carbon buildup.
- Thermostat with gasket suitable for the following types:
- Shibaura
- ST318, ST321, ST324
- P15F, P17F, P145F, P155F, P165F, P175F, P185F
- SP1400, SP1440, SP1500, SP1540, SP1700, SP1740, SP1800, SP1840, SP2140
- Hydraulic filter | Coarse filter suitable for:
- Kubota
- A13, A14, A15, A17, A19, A155, A175, A195
- B1-14, B1-15, B1-16, B40
- GF1800
- Exclusively from our own production line: a high-quality fuel injector nozzle that meets the strictest tolerances. This 'Snelparts' injector tip is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- Advice from experience; don't go for cheaper alternatives. Extensive research has been done into OEM quality such as well-known brands in this industry!
- Be careful with Iseki . Specifically selected for the GEAS and TK series. These fit 100% on the models below with nozzle 6215-311-028-00
- For other E3CD, E3CE, E3CF nozzle, search in the search bar for DN0PDN114 for other variant!
- Fuel Injector Mounting Kit - Kubota (05 / 03 / Super Mini Series)
- Complete 3-piece set for leak-free mounting of a fuel injector. Prevent compression loss and always replace these rings during installation.
- Please note: order set per cylinder; so 3 cylinders, order 3x.
- Contents & OEM numbers for reference:
- 19077-53650: Heat Shield - 6215-315-006-00
- Head gasket for the Kubota V1505 and V1505-T engine (78 mm bore). Suitable for e.g. B series, KX71 and Bobcat S100. OEM: 16394-03310.
- The dynamo is delivered by a certified supplier and fully tested. The compatible models are selected with great care!
- Technical data
- Voltage (V) 12
- Amperage (A) 40
- Freewheel pulley No
- Temperature switch | sensor suitable for:
- Kubota
- KX121-2, KX121-2S, KX121-3, KX161-2, KX161-2S, KX161-3, KX41-2, KX41-2S, KX41H, KX61-2, KX61-2S, KX71, KX91-2, KX91- 2S, KX91-3
- F2260 F2400 F2560, F2560E, F2680E, F2880E-F, F2880-F, F3060, F3080, F3680
- FZ2100, FZ2400
Showing 12 of 23 products
