-
Cooling & radiators2 Products -
Electrical parts3 Products -
Engine parts12 Products -
Filters3 Products
Thumbnail image
Product
Price
- Please note: this is the M10 version (M10 x 1.25).
- For the Iseki TX1300, Mitsubishi D1300 and MT1301, Satoh S370 and ST1300 and Noda NR1301 with KE70 engine, there are two versions. Check this before ordering:
- Chassis number from 16016 or engine number KE70 from 2765: this is the correct glow plug.
- Chassis number 1 to 16015 or engine number KE70 1 to 2764: you need the M12 version.
- To the M12 version →
- Nozzle type: Pintle nozzle
- Opening pressure: 120 bar
- ✅ With thermostat gasket
- verified quality
- Starter motor suitable for:
- Iseki
- TU120, TU125, TU127, TU130, TU135, TU137, TU140, TU145, TU147, TU150, TU155, TU160, TU165, TU167, TU170, TU175, TU177
- TX145, TX155, TX1410, TX1510, TX2140, TX2160
- TU1400
- Suitable for MT18, MT21, MT22, MT23, MT24, MT2501
- Snel Parts premium quality. Manufactured in our own factory, allowing us to guarantee the quality ourselves. The copper windings are heavier than usual in the aftermarket segment and withstand prolonged and frequent starting better. Supplied in the Snel Parts box.
- Starter motor of Premium quality suitable for:
- Mitsubishi Engine
- S4L, S4L2
- S4L-Y262KL, S4L2-Y263KL, S4Q2-Y262KL
- Glow candle / Glow plug of premium quality suitable for:
- Technical data
- Length 119mm
- Thread M10 x 1.25mm
- Kubota
- Main bearing set suitable for:
- Mitsubishi:
- D1350, D1450, D1550
- MT17, MT18, MT20, MT25, MT160, MT180, MT200, MT205, MT210, MT221, MT230D, MT231, MT240, MT241, MT250, MT260D, MT373, MT470, MT1401, MT1601
- MTX225, MTX245
- Sump Plug Washer / Seal 14 mm (Mitsubishi Industrial | Lombardini)
- High-quality copper seal washer for the oil drain plug. Specifically suitable for Mitsubishi Industrial engines (L-series & S-series) used in microcars, mini excavators, and tractors.
- This seal washer guarantees a perfect seal for the oil sump. During maintenance of industrial diesel engines and microcars, it is essential to replace this washer preventatively to prevent oil leakage and pressure loss. The washer conforms to the mating surface of the oil sump for a hermetic seal.
- Product Specifications
- Inner Diameter: 14 mm
- This head gasket is of high quality and the compatible models have been selected with great care!
- Model series suitable for the Mitsubishi K3E
- Piston size: 76mm
- Mitsubishi
- MT18, MT185
- Spray angle: 155 °
- Nozzle type: Hole-type nozzle (multi-hole)
Showing 12 of 17 products
