-
Chassis285 Products -
Clutch / transmission276 Products -
Cooling & radiators243 Products -
Electrical parts168 Products -
Engine parts1359 Products -
Filters260 Products -
Oil11 Products -
Uncategorized3 Products
Thumbnail image
Product
Price
- Exclusive from our own production line: a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for installation ("Plug & Play").
- We guarantee perfect atomization and opening pressure, so you don't have to overhaul or test the fuel injector yourself. Remove the old one, install the new one.
- Advice from experience: If one fuel injector fails, the others are often worn out as well. For smooth engine running, we recommend replacing them as a set. Don't forget to order the flame plates and copper sealing rings!
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard. This lets you get started safely and leak-free right away. The set includes:
- A new heat shield (sealing washer) against extreme heat and carbon buildup.
- Fuel cap suitable for:
- Bobcat
- Excavators:
- 319, 320, 321, 322, 323, 324, 325, 328, 329, 331, 334, 335, 337, 341, 425, 428, 443, 453, 463, 543, 553, 631, 641, 643, 645, 721, 730, 731, 741
- E14, E16, E32, E35, E35i
- The ignition key is suitable for the following models:
- Bobcat
- Excavators: 319, 320, 321, 322, 323, 325, 328, 329, 331, 334, 335, 337, 341, 425, 428, 430, 435, E17, E17Z, E19, E20, E25, E26, E32, E32i, E35, E35i, E42, E45, E50, E55
- All-Wheel Steer Loaders: A220, A300, A770
- Skid Steer Loaders: 310, 313, 440, 443, 453, 463, 530, 533, 540, 542, 543, 553, 630, 631, 632, 641, 642, 643, 645, 653, 730, 731, 732, 741, 742, 743, 751, 753, 763, 773, 7753, 843, 853, 863, , 873, 883, 943, 953, 963, 1213, 1600, 2000, 2400, 2410, , MT50, MT52, MT55, S100, S130, S150, S160, S175, S185, S205, S220, S250, S300, S330, S450, S510, S530, S550, S570, S590, S595, S630, S650, S70, S740, S750, S770, S850, S76
- We only work with high-quality oil filters from German or other European suppliers!
- Thread: (G)3/4 16 UNF
- Diameter: 95.0 mm
- Height: 89mm
- Below is the listing that we have meticulously selected from our suppliers. If the machine is listed below then it fits 100%.
- Fuel cap with key and security for:
- Bobcat
- Excavators:
- 319, 320, 321, 322, 323, 324, 325, 328, 329, 331, 334, 335, 337, 341, 425, 428, 443, 453, 463, 543, 553, 631, 641, 643, 645, 721, 730, 731, 741
- E14, E16, E32, E35, E35i
- Connecting Rod suitable for:
- Kubota
- L2501 HST, L2501, L3240 GST, L3240 HST, L3240, L3300 GST, L3300, L3400 HST, L3400, L3410 GST, L3410 HST, L3410, L3430, L35
- L1-22, L1-24 , L1-225, L1-235, L1-245, L1-255, L1-275
- KX037-4, KX91-3S2, U35-3S2, U35-4, U36-4
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical data
- Voltage (V) 12
- Power (kW) 1.2
- Fitting edge (mm) 82.3
- Dimensions :
- Length: 265mm
- Outside diameter: 60mm
- Inner diameter: 41mm
- Air filter suitable for the following models:
- Fuel Shut Off Solenoid / Stop Solenoid 12 Volt (3-pin) Has your machine suddenly stalled or does it no longer start because it is not getting fuel? Often a faulty stop solenoid is the cause.
- Technical specifications
- Voltage: 12V
- Connection: 3-pin connector (with wiring harness)
- Mounting: Flange mounting on the fuel pump (near the regulator)
- This is a premium dynamo suitable for the models below! This ensures the optimal operation of your Bobcat.
- Technical data
- Voltage 12
- Amperage 40
- Pulley (mm) 69.0
- Temperature switch | sensor hydraulics suitable for:
- Bobcat
- A220, A300
- 325, 328, 329, 331, 334, 335, 337, 341, 753, 763, 773, 863, 864, 873, 883, 963
- S220, S250, S300, S330
