-
Chassis23 Products -
Clutch / transmission12 Products -
Cooling & radiators5 Products -
Electrical parts7 Products -
Engine parts25 Products -
Filters7 Products -
Oil11 Products
Thumbnail image
Product
Price
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- The starter motor has been supplied by a certified supplier and fully tested. With great care the compatible models have been searched for!
- Technical specifications:
- Voltage: 12 V
- Power: 1.4 kW
- Flange diameter: 66.0 mm
- Oil pressure switch suitable for many models, including:
- Kubota
- A13, A14, A15, A17, A19, A30, A155, A175, A195
- B1550, B1700DT, B1750, B1830, B2100, B2150, B2310, B2320DT, B2400, B2410, B2601HSD, B2620, B2630, B2650, B2710, B2910, B2920, B3000, B3030, , B3300, B3350, B4200, B4850DT, B6200HST, B7200, B7300, B7500, B7410, B7510, B7610, B7800, B8200, B9200
- B20, B21, B26
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
- Thermostat with gasket suitable for the following types:
- Shibaura
- ST318, ST321, ST324
- P15F, P17F, P145F, P155F, P165F, P175F, P185F
- SP1400, SP1440, SP1500, SP1540, SP1700, SP1740, SP1800, SP1840, SP2140
- ✅ With thermostat gasket
- Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
- Strong, durable fastener for the cylinder head of your Kubota engine.
- This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
- Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
- ? Technical data:
- ✔️ Application: Z402, Z482, Z602 and related variants
- Replacement fuel filter – complete filter housing for mini tractors
- Give your mini tractor a second wind with this replacement fuel filter housing , specially designed as a simple and reliable solution for leaks, cracks or worn parts. Whether you are dealing with a leaking drain tap, a damaged filter element or a torn filter basket - this complete filter housing offers an immediate solution.
- ✅ Suitable for various brands , including Kubota, Iseki, Yanmar and more
- ✅ Supplied complete with connections – easy to install
- ✅ Universally applicable – in some cases slight adjustment is necessary
- Snel Parts water pump with gasket for Kubota Z482, Z602, D722, and D902 engines. Suitable for Kubota, Avant, Bobcat, Takeuchi, Komatsu, Schäffer, and more. Note: always check your OEM number for the correct fit.
Showing 12 of 78 products
