Release bearing Yanmar Ke-2 | Ke-3 | Ke-4 – CT35S 35x57x14

Description

Technical data:

• Inner diameter: 35 mm
• Outer diameter: 57 mm

New clutch release bearing for Yanmar Ke-series compact tractors. This is the bearing that moves the release bearing sleeve over the input shaft as soon as you depress the clutch pedal. If it starts squeaking, rattling, or vibrating when pressed, this is the part that needs to be replaced.

Supplied as an original Koyo/JTEKT bearing, type CT35S. Exactly the size specified by Yanmar, making it a direct 1-to-1 replacement for OEM 194300-22240.

✔️ Original Koyo/JTEKT bearing type CT35S, no no-name copy
✔️ Exact size 35 x 57 x 14 mm, 1-to-1 replacement for OEM 194300-22240
✔️ Sealed and pre-greased, relubrication is not necessary

Technical specifications:

• Type: CT35S (clutch release bearing)
• Inner diameter (ID): 35 mm
• Outer diameter (OD): 57 mm
• Height / width: 14 mm
• Bearing manufacturer: Koyo / JTEKT
• Design: sealed and pre-greased

Suitable for:

Yanmar

• Ke-2A, Ke-2D, Ke-2DF, Ke-2DN, Ke-2DL
• Ke-3A, Ke-3D, Ke-3DA, Ke-3DAU
• Ke-4A, Ke-4DA

Please note: Yanmar later reused the names Ke-2D and Ke-3D for a newer generation without a conventional drive clutch. This release bearing belongs to the Ke-series with a manual transmission. Are you unsure about your version? Measure your old bearing: this bearing is 35 mm inside, 57 mm outside, and 14 mm high.

OEM for reference:

• 194300-22240, 19430022240 – release bearing Yanmar Ke-series
• CT35S – bearing type (Koyo / JTEKT)

Matching clutch parts Ke-series (OEM for reference):

• 194215-22230 – release bearing sleeve
• 194215-21700 – pressure plate (all Ke models)
• 194440-21400, 194510-21400, 194515-21400, 194215-21400 – clutch disc 180 mm / 10 splines

Tip: when doing a clutch job, replace the bearing sleeve (194215-22230) immediately and check the clutch disc thickness. The transmission has to come out anyway, and a worn sleeve will cause the new bearing to run crookedly.