My garage
Case IH 255
Tractor
Active
Looking for Case IH 255 parts? Browse our complete range of compatible spare and maintenance parts for the Case IH 255 mini tractor—including filters, engine parts, cooling, electrical, and hydraulic components—available directly from stock for fast worldwide delivery.
Case IH 255 parts
- Horsepower
- 24 hp
- Engine oil
- 4,2 l, 15W40
- Transmission oil
- 25 l, UTTO / GL-4
- Fuel capacity
- 20,8 l
- Voltage
- 12 V
- Rear PTO
- 540 / 1150 rpm
-
Chassis24 compatible parts -
Clutch / transmission14 compatible parts -
Cooling & radiators3 compatible parts -
Electrical parts4 compatible parts -
Engine parts10 compatible parts -
Filters6 compatible parts -
Oil11 compatible parts
Thumbnail image
Product
Price
- Please note: this is the M10 version (M10 x 1.25).
- For the Iseki TX1300, Mitsubishi D1300 and MT1301, Satoh S370 and ST1300 and Noda NR1301 with KE70 engine, there are two versions available. Please check this before ordering:
- Chassis number from 16016 or engine number KE70 from 2765: this is the correct glow plug.
- Chassis number 1 to 16015 or engine number KE70 1 to 2764: you need the M12 version.
- To the M12 version →
- Towbar bracket CAT1. for your mini tractor!
- Optimize the use of your mini tractor with our high-quality tow bar. This robust accessory is designed for easy mounting in the rear linkage and is suitable for all types of trailers, including tippers.
- Iseki
- Kubota
- Yanmar
- A valve seal prevents oil from running past the valve stem into the combustion chamber, and it is important to replace these because worn seals lead to oil consumption, smoke generation, and reduced engine performance.
- Valve seals / Valve stem seals suitable for, among others, the following models:
- Iseki
- TU120, TU125, TU130, TU135, TU137, TU140, TU145, TU150, TU155, TU157, TU160, TU165, TU167, TU170, TU175, TU175F, TU177, TU1400, TU1500, TU1600, TU318, TU1601, TX1000,
- TX145, TX155, TX1410, TX1510, TX2140, TX2160, TX145, TX1410, TX2140
- Universal safety pins / cotter pins for compact tractors. Available in two sizes: Safety pin 6x45mm for light applications and PTO Pin 8x56mm for the PTO shaft and heavier attachments. Galvanized steel with spring ring.
- Universal Cat. 1 top link for compact tractors, available in three lengths. Fits all 3-point hitches with Cat. 1 connection (25.4 mm) — Kubota, Iseki, Yanmar, Mitsubishi and more.
- Replacement fuel filter: complete filter housing for compact tractors
- Give your compact tractor a new lease on life with this replacement fuel filter housing, specially designed as a simple and reliable solution for leaks, cracks, or worn parts. Whether you are dealing with a leaking drain cock, a damaged filter element, or a cracked filter bowl: this complete filter housing provides an immediate solution. Suitable for various brands, including Kubota, Iseki, and Yanmar. Supplied complete with connections and easy to install; in some cases, minor modification is required.
- Technical specifications:
- Length: 115 mm
- Filter element diameter: 38.5 mm
- Sizes
- Height: 137mm
- Diameter: 96mm
- Internal thread: 1 1/8×16, 1"1/8-16UNF, 37mm
- Hydraulic filter suitable for the following models:
- Seat suitable for Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Satoh, Suzue,
- Parts for your mini tractor often do not contain all the gaskets. The solution for this is a liquid gasket that seals the part and prevents leakage. Black Gasket Maker is a flexible, waterproof filler and adhesive, resistant to high temperatures. It is a polysiloxane based product in a pressure cartridge to quickly and easily make seals and gaskets. Characteristics
- Resistant to oils, transmission oils, water, antifreeze, grease, smoke and hot toxic gases.
- Replaces cork, felt, paper and rubber gaskets.
- Resistant to low temperatures down to -40°C (continuous) and to high temperatures up to 232°C (continuous) and 300°C (short-term).
- Is harmless to electronic sensors and catalytic converters.
- Suitable for any compact tractor. If you have a leaking fuel filter element tap or a crack in the filter bowl, this can provide a simple solution.
- Technical specifications:
- Outer diameter: 55 mm
- Total height: 98 mm
- Housing height: 83 mm
- Universal joint 20x54.8 mm for overhaul of 4WD intermediate shaft / propshaft. Incl. circlips.
Showing 12 of 65 products
Case IH 255 Parts & Maintenance
Maintaining or repairing your Case IH 255 mini tractor starts with parts that fit accurately. On this page you will find all compatible Case IH 255 spare parts—from oil, fuel, and air filters to water pumps, radiator hoses, clutches, brakes, front axle seals, three-point linkage parts, and electrical components. Use the category filter to quickly jump to the exact assembly for your Case IH 255.
Looking for parts for another Case IH model? View our complete range of Case IH mini tractor parts or contact our team for expert support.
