Tightening torque cylinder head Mitsubishi KE, K3, K4, L2, L3, S3L, S4L engines

Below are the tightening torques for all two, three and four cylinder engines known from the Mitsubishi K4, K3 and L2 and L3 series. We have these data from official manuals of the respective engines. Where possible, we have added the tightening torque sequence. Translated with www.DeepL.com/Translator (free version)

Mitsubishi tightening torques

It is an important rule that the head bolts must first be oiled, on which the correct NM can then be measured with the torque spanner.

2 Cilinder:

Mitsubishi KE70

Tractors: Mitsubishi S370, Mitsubishi MT372, Mitsubishi D1300, Satoh ST1300, Bolens G152, Bolens G154

• Cylinder head bolt torque: 94-101 ft-lbs (13-14kg-m)

• Connecting rod cap nut torque: 23-25 ft-lbs (3.2-3.5 kg-m)

• Valve clearance: 0.014 inches, (0.35mm) cold(Ex-In)

Mitsubishi KE75

Tractors: Satoh ST1510, Mitsubishi D1500 V, Bolens G172, Bolens G174, Iseki TX1500

• Cylinder head bolt torque: big bolts (M12) 79.5 – 86.8 ft-lbs (11-12kg-m)

• Cylinder head bolt torque: small bolts (M10) 50.6 – 57.9 ft-lbs (7-8kg-m)

• Connecting rod cap nut torque: 23.1 to 25.3 ft-lbs (3.2 – 3.5 kg-m)

• Main bearing cap torque: 36.2 to 39.8 ft-lbs (5-5.5 kg-m)

• Valve clearance: 0.010 inches, (0.25mm) cold(Ex-In)

Mitsubishi K2B, K2C

Tractors: Iseki TX1210

• Cylinder head bolt torque: 94-101 ft-lbs (12-13kg-m)
• Connecting rod cap nut torque: 40-43 ft-lbs (3.2-3.5 kg-m)
• Valve clearance: 0.009842 inches, (0.25mm) cold(Ex-In)

 

3 Cilinder

Mitsubishi K3A | K3B | K3C | K3D | K3E

Tractors: S373, S470, MT160, MT180, MT210, D1450, ST1420, ST1450, D1550, ST1520, ST1540, MT1401, MT1601, MTE1800, Case IH 234, 235

• Cylinder head bolt torque: big bolts (M12) 79.5 – 86.8 ft-lbs (11-12kg-m)

• Cylinder head bolt torque: small bolts (M10) 50.6 – 57.9 ft-lbs (7-8kg-m)

• Connecting rod cap nut torque: 23.1 to 25.3 ft-lbs (3.2 – 3.5 kg-m)

• Main bearing cap torque: 36.2 to 39.8 ft-lbs (5-5.5 kg-m)

• Valve clearance: 0.010 inches, (0.25mm) cold(Ex-In)

 

Mitsubishi KE130

Mitsubishi Tractors: D2000 II, S630, D2300

• Cylinder head bolt torque: big bolts (M14) 101-115 ft-lbs (13-14 kg-m)

• Cylinder head bolt torque: small bolts (M10) 54-61 ft-lbs
• Connecting rod cap nut torque: 36-39 ft-lbs

• Valve clearance: 0.013 inches cold(Ex-In)

Mitsubishi S3L

• Cylinder head bolt torque big bolts (M10) 83.4 – 93,2nm (61.5 – 68.7 ft-lbs) (8.5-9.5 kg-m)
• Connecting rod cap nut torque(M9): 32.4 – 37.3 NM
• Valve clearance: 0.25mm(in+out)

4 Cilinder

Mitsubishi S4L

• Cylinder head bolt torque big bolts (M10) 83.4 – 93,2nm (61.5 – 68.7 ft-lbs) (8.5-9.5 kg-m)
• Connecting rod cap nut torque(M9): 32.4 – 37.3 NM
• Valve clearance: 0.25mm(in+out)

Mitsubishi K4B | K4C | K4D | K4E –

Mitsubishi tractors: D1650, ST1620, ST1640, D1850, ST1820, ST1840, D2050, ST2020, ST2040, D2350, ST2320, ST2340, MT1801, MT2001, MT2201, MT2501, S670

• Cylinder head bolt torque: big bolts (M12) 87-94 ft-lbs (12-13kg-m)
• Cylinder head bolt torque: small bolts (M10) 58-65 ft-lbs (8-9kg-m)
• Connecting rod cap torque: 36-40 ft-lbs (5-5.5 kg-m)
• Valve clearance: 0.010 inches, (0.25mm) cold(in+out)

 

L2 serie Mitsubishi

Mitsubishi L2E, L2A, L2C

• Cylinder head bolt torque: big bolts (M8) 14,47-21,70 ft-lbs (2.0-3.0kg-m) 19,6 – 29,4 NM
• Cylinder head bolt torque: small bolts (M10) 54,25-61,48 ft-lbs (7,5-8,5kg-m) 73,5 – 83,4NM
• Connecting rod cap torque: 36-40 ft-lbs (5-5.5 kg-m)
• Valve clearance: 0.0098 inches, (0.25mm) cold(in+out)
• Bore size
  • L2A 65mm
  • L2C 70mm
  • L2E 76mm

• 

  L2E torque specifications

 

L3 Serie

Mitsubishi L3E, L3A, L3C

• Cylinder head bolt torque big bolts (M8) 14,47-21,70 ft-lbs (2.0-3.0kg-m) 19,6 – 29,4 NM
• Cylinder head bolt torque small bolts: (M10) 54,25-61,48 ft-lbs (7,5-8,5kg-m) 73,5 – 83,4NM
• Connecting rod cap nut torque: 36-40 ft-lbs (5-5.5 kg-m)
• Valve clearance: 0.0098 inches, (0.25mm) cold(in+out)
• Bore size
  • L3A 65mm
  • L3C 70mm
  • L3E 76mm