Engine Flush Professional 250ml – Engine cleaner for compact tractors (Kubota, Yanmar, Iseki)

Description

A compact tractor’s engine often has more years on it than the hour meter suggests. Short trips, long winter storage, and oil left in too long — these cause sludge, carbon deposits, and hardened oil residue to build up in the lubrication system. Engine Flush Professional flushes out this contamination right before you change the oil.

Why use it on an older compact tractor?

Many Kubotas, Yanmars, and Isekis from the ’80s and ’90s still perform excellently — but new engine parts for these blocks are scarce and pricey. A flush before every major oil change is a small investment that adds years of life to your engine. Especially recommended for a newly purchased tractor with an unknown maintenance history, or a machine that has been sitting for a long time.

✔️ Dissolves sludge and carbon deposits before the oil change
✔️ Keeps lubrication intact during flushing — protects bearings and camshaft
✔️ 1 bottle = 1 treatment, suitable for both diesel and petrol

How to use it:

1. Pour the entire bottle (250 ml) into the warm engine oil before draining.
2. Let the engine idle for 10–15 minutes — do not put it under load.
3. Drain the old oil completely, replace the oil filter, and fill with fresh engine oil.

Specifications:

• Contents: 250 ml (1 engine treatment)
• For diesel and petrol engines
• Compatible with mineral, semi-synthetic, and synthetic oil

Suitable for compact tractors from: Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Shibaura, Satoh, Honda, and all other compact diesel engines.

Tip: combine with a new oil filter and a fresh sump plug washer for a complete service. Oil leaks after a change are often caused by a reused washer.