Motor Flush 300ml – Motor oil system cleaner for compact tractors (Kubota, Yanmar, Iseki)

After thousands of operating hours, a compact tractor’s engine collects sludge, carbon, and wear particles — even with regular oil changes. Motor Flush loosens these deposits from the entire oil system, so the new oil can start working clean immediately and doesn’t turn black from old dirt within 50 hours.

Why flush an older compact tractor?

Many Kubotas, Yanmars, and Isekis have been running for decades. Over time, sludge inevitably builds up in the oil pumps, oil galleries, and even the filter mesh — especially if the tractor has been sitting for years or has run too long on the same oil. A flush before the oil change is an inexpensive way to get that contamination out before it causes damage to the oil pump or camshaft.

✔️ Cleans oil pump, oil galleries, and filter mesh
✔️ Keeps lubrication intact during flushing — protects engine bearings
✔️ 300ml — suitable for compact tractors with larger oil capacity (4L+)

How to use it:

1. Add the entire bottle (300 ml) to the warm motor oil before draining.
2. Let the engine idle for 10–15 minutes — do not put it under load.
3. Drain the old oil completely, replace the oil filter, and fill with fresh engine oil.

Specifications:

• Contents: 300 ml (1 engine treatment)
• Suitable for diesel and petrol engines
• Compatible with mineral, semi-synthetic, and synthetic oil

Suitable for compact tractors from: Kubota, Yanmar, Iseki, Hinomoto, Mitsubishi, Shibaura, Satoh, Honda, and all other compact diesel engines.

Tip: for smaller engines (up to 3L oil capacity), our Motor Flush Professional 250ml is the right size.