-
Chassis308 Products -
Clutch / transmission276 Products -
Cooling & radiators246 Products -
Electrical parts176 Products -
Engine parts1378 Products -
Filters260 Products -
Oil11 Products -
Uncategorized4 Products
Thumbnail image
Product
Price
- Technical data Head diameter 11 mm Length 90 mm 100mm x 10.25 mm
- Valve rubbers suitable for Kubota V2203
- Per piece.
- Exclusive from our own production line: a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for installation ("Plug & Play").
- We guarantee perfect atomization and opening pressure, so you don't have to overhaul or test the fuel injector yourself. Remove the old one, install the new one.
- Advice from experience: If one fuel injector fails, the others are often worn out as well. For smooth engine running, we recommend replacing them as a set. Don't forget to order the flame plates and copper sealing rings!
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard. This lets you get started safely and leak-free right away. The set includes:
- A new heat shield (sealing washer) against extreme heat and carbon buildup.
- This water pump is now part of our own Snel Parts line and comes in the recognizable red and black Snel Parts branded packaging. A 1-to-1 replacement for the original water pump in the Kubota D and V engine series, carefully checked and including the corresponding mounting gasket.
- The Kubota V2203 M-DI engine requires a different pump — check our collection for the correct version.
- ✔️ Delivered in Snel Parts branded packaging — individually checked and securely packed
- ✔️ Includes corresponding gasket — ready to mount without extra purchases
- ✔️ Exact OEM fit for Kubota D1102, D1302, D1402, D1703 and V1502-V2203
- Sizes
- Height: 137mm
- Diameter: 96mm
- Internal thread: 1 1/8×16, 1"1/8-16UNF, 37mm
- Hydraulic filter suitable for the following models:
- Fuel cap suitable for:
- Bobcat
- Excavators:
- 319, 320, 321, 322, 323, 324, 325, 328, 329, 331, 334, 335, 337, 341, 425, 428, 443, 453, 463, 543, 553, 631, 641, 643, 645, 721, 730, 731, 741
- E14, E16, E32, E35, E35i
- The ignition key is suitable for the following models:
- Bobcat
- Excavators: 319, 320, 321, 322, 323, 325, 328, 329, 331, 334, 335, 337, 341, 425, 428, 430, 435, E17, E17Z, E19, E20, E25, E26, E32, E32i, E35, E35i, E42, E45, E50, E55
- All-Wheel Steer Loaders: A220, A300, A770
- Skid Steer Loaders: 310, 313, 440, 443, 453, 463, 530, 533, 540, 542, 543, 553, 630, 631, 632, 641, 642, 643, 645, 653, 730, 731, 732, 741, 742, 743, 751, 753, 763, 773, 7753, 843, 853, 863, , 873, 883, 943, 953, 963, 1213, 1600, 2000, 2400, 2410, , MT50, MT52, MT55, S100, S130, S150, S160, S175, S185, S205, S220, S250, S300, S330, S450, S510, S530, S550, S570, S590, S595, S630, S650, S70, S740, S750, S770, S850, S76
- Exclusively from our own production line:</> a complete fuel injector combination, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- advice from experience: Don't go for cheaper alternatives; extensive research has been done into OEM quality. PLEASE NOTE: This fuel injector is specifically for engines with Indirect Injection (IDI).
- Does your engine have Direct Injection (DI)? (Often recognizable by thinner "pencil fuel injectors"). Then this fuel injector will not fit. This holder has a thick housing (approx. 20-25mm).
- Includes complete seal kit for direct installation! We supply this nozzle with all necessary new copper washers as standard, so you can get to work safely and leak-free. The included set consists of:
- Premium quality Air filter
- Sizes:
- Outside diameter: 102mm
- Inner diameter: 66mm
- Diameter metal connection: 146mm
- Glow candle / Glow plug of premium quality suitable for:
- Technical data
- Length 119mm
- Thread M10 x 1.25mm
- Kubota
- Exclusive from our own production line: a complete fuel injector assembly (Turbocharger Spec), fully assembled and adjusted to the correct opening pressure. This 'Snelparts' injector is ready for immediate installation.
- This version is specifically calibrated for Kubota Turbocharger engines (identifiable by the -T after the engine code, such as V1505-T).
- Advice from experience: Turbocharger engines are more sensitive to correct atomization due to higher temperatures. Always replace these fuel injectors as a set to prevent "hotspots" on the pistons. Also order new injector washers right away!
- technical specifications
- Type: Complete Fuel Injector Holder + Nozzle (DN4PD92)
- We only work with high-quality oil filters from German or other European suppliers!
- Thread: (G)3/4 16 UNF
- Diameter: 95.0 mm
- Height: 89mm
- Below is the listing that we have meticulously selected from our suppliers. If the machine is listed below then it fits 100%.
Showing 12 of 40 products
