-
Chassis308 Products -
Clutch / transmission279 Products -
Cooling & radiators246 Products -
Electrical parts176 Products -
Engine parts1384 Products -
Filters260 Products -
Oil11 Products -
Uncategorized4 Products
Thumbnail image
Product
Price
- Glow Plug Premium Quality (M8)
- Start your machine effortlessly in all weather conditions with this high-quality M8 glow plug. Specifically developed for modern diesel engines, this glow plug offers robust performance and instant heat delivery, essential for a reliable start and preserving your starter motor and battery.
- Note: This is the M8 version (for serial numbers <489916). Older models or specific series may use the M10 variant. Always check the thread of your current glow plug before ordering.
- ✔️ Premium Ignition: Guarantees a quick start and reduces battery strain
- ✔️ High-Quality Finish: Durable materials for a long service life
- Sizes:
- Outside diameter: 29mm
- Inner diameter: 13mm
- Length: 84mm
- Fuel filter available for:
- Exclusive from our own production line: a complete fuel injector assembly, fully assembled and adjusted to the correct opening pressure. This ‘Snelparts‘ injector is ready for immediate installation.
- Specifically developed for compact Kubota 2- and 3-cylinder engines. These engines often run at high RPMs; a fresh fuel injector immediately ensures less smoke, lower consumption, and better starting performance.
- Expert advice: This fuel injector is widely used in Moped Cars (such as Aixam).
- With these small engines, atomization is critical. Preferably replace them as a set to prevent vibrations.
- Don't forget to replace the copper washer under the fuel injector (this seals against compression).
- The piston rings are of high European quality and compatible models have been sought with great care:
- Kubota
- A-13, A-14
- B1121, B1220, B1610, B1620D, B1820 D, B1820 DS, B52, B7300HSD, B7400HSD, B7410D, BX1800, BX1800D, BX1830D, BX1850, BX1850D, BX1860, BX1860D, BX18 70D, BX1880
- G1900, G1900S, G2160, GB110, GB115, GB14, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, GR1600EC2, GZD21
- Strong, durable fastener for the cylinder head of your Kubota engine.
- This set is suitable for various Kubota Z-series engines, including the Z402, Z482, and Z602.
- Each engine requires 10 cylinder head bolts (10 pcs required) for correct cylinder head assembly.
- ? Technical data:
- ✔️ Application: Z402, Z482, Z602 and related variants
- Snel Parts water pump with gasket for Kubota Z482, Z602, D722, and D902 engines. Suitable for Kubota, Avant, Bobcat, Takeuchi, Komatsu, Schäffer, and more. Note: always check your OEM number for the correct fit.
- Head gasket for the Kubota D722 three-cylinder diesel engine with 67 mm bore. Suitable for B1610, BX1880, GB140, K008, TG1860, U10, ZD18, Bobcat, Avant, Schäffer, and others. OEM: 16871-03310 and 1J092-03310.
- Fuel Injector Mounting Kit - Kubota (05 / 03 / Super Mini Series)
- Complete 3-piece set for leak-free mounting of a fuel injector. Prevent compression loss and always replace these rings during installation.
- Please note: order set per cylinder; so 3 cylinders, order 3x.
- Contents & OEM numbers for reference:
- 19077-53650: Heat Shield - 6215-315-006-00
- Fuel filter for the following models
- Antonio Carraro
- COUNTRY 4400, TTR 4400 CON ARCO, TTR 4400 CON ARCO II SERIES, TTR 4400 CON TELAIO, TTR 4400 CON TELAIO II SERIES, TTR 4400 4WS, TGF 7800, TRX 7800
- TIGRE 3800 F, TIGRE 4400 F, TIGRE 4000, T 5800 Jona, SN 5800 V Major, TC 5800F Major, TN 5800 Major.
- ATLAS COPCO
- Injector / atomizer nozzle suitable for:
- Kubota engine
- D722, D782, D902, Z482
- D902, D902EBH
- D722, D722EBH, D772B, D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1, D722-E4
- Filter Kit | maintenance set suitable for:
- Very important! This set includes a sump plug copper seal. The oil sump plug seal is often forgotten, which causes oil leakage. It must always be replaced!
- Consisting of:
- Air filter
- Outside diameter: 105mm
Showing 12 of 28 products
