Filter kit VST 180D – Mitsubishi K3 engine (oil, fuel, air)

Description

Complete maintenance kit for the VST 180D (VST Tillers / VST Shakti) compact tractor with the Mitsubishi K3 three-cylinder diesel engine. Technically, the VST 180D is identical to the Mitsubishi MT180 / Iseki TU150-TU1600 — same engine and filters. This kit contains the three filters required for a full service: oil filter, fuel filter, and air filter.

✔️ Complete for one service — oil filter, fuel filter, and air filter in a single order
✔️ Exact OEM fit — based on the original Mitsubishi K3 part numbers
✔️ Premium quality filters from European suppliers

Kit contents:

• Oil filter — spin-on, M20×1.5 · Ø80 mm
• Fuel filter — Ø29 × inner Ø13 × L59 mm
• Air filter — Ø83 × L185 mm

Suitable for:

VST

• 180D (Tillers / Shakti), Fieldtrac 180D

Equivalent to (same Mitsubishi K3 machine):

• Mitsubishi MT180 / MT1601 · Iseki TU150 – TU1600 · Eurotrac VST180

OEM for reference:

• 5650-040-4879-0, 565004048790 – Fuel filter
• 1427-101-2840-0, 142710128400 – Air filter
• Oil filter – Mitsubishi K3 / Iseki TU (spin-on M20×1.5)

Tip: replace all three filters at the same time during every service — a saturated fuel or air filter costs power and increases fuel consumption. Don't forget the engine oil when replacing the oil filter.

Also need to change the transmission and hydraulic oil? Change the transmission and hydraulic oil during a major service as well. For this, you can use our GL-4 transmission oil in a 10-liter container. Prefer everything all at once? Check out the complete maintenance kit for the VST 180D and Fieldtrac 180D.