Complete gasket set Yanmar 3TNM68 – Stage V successor of 3TNV68 | AJ217 combine | IHI 12NXE | Kato 12VXE | Ferris IS2000 | JCB | Linhai LH300

Description

New complete gasket set suitable for the Yanmar 3TNM68 three-cylinder diesel engine — the modern Tier 4 Final / EU Stage V successor to the well-known 3TNA68 / 3TNE68 / 3TNV68 engines (same 68 mm bore × 72 mm stroke, indirect injection). This set contains all gaskets, oil seals, and seals required for a complete engine overhaul or major maintenance service.

✔️ Complete set — all gaskets, oil seals, and seals for a complete overhaul
✔️ Suitable for all 3TNM68 sub-variants (-ALH, -ASA, -HA, -HDW, -HGE, -AFS, -GHFCG, -GGEP)
✔️ Includes head gasket (OEM 119125-01330) and front + rear crankshaft oil seals

Contents of the set:

• Head gasket (cylinder head gasket)
• Valve cover gasket
• Valve stem seals
• Intake manifold gasket
• Exhaust manifold gasket
• Oil pan gasket
• Timing cover gasket
• Water pump gasket
• Thermostat housing gasket
• Crankshaft oil seals (front + rear)
• Various smaller gaskets, copper washers, and O-rings

Mechanic's tip: always replace all gaskets during an overhaul to prevent leaks and loss of compression after the rebuild. Do not forget the valve stem seals either — they are often hardened and cause blue smoke.

Technical specifications:

• Engine: Yanmar 3TNM68 (Tier 4 Final / EU Stage V)
• Cylinders: 3
• Bore: 68 mm
• Bore × Stroke: 68 × 72 mm
• Displacement: 0.784 L
• Power: 14.7 kW @ 3600 rpm (~19.7 hp)
• Aspiration: Naturally aspirated
• Type: Indirect injection (IDI)

Suitable for engine variants:

Yanmar 3TNM68 sub-variants

• 3TNM68-ALH, 3TNM68-ASA, 3TNM68-HA, 3TNM68-HDW
• 3TNM68-HGE, 3TNM68-AFS, 3TNM68-GHFCG, 3TNM68-GGEP

Suitable for machines:

Yanmar

• AJ217 combine (rice harvester)
• Various rice transplanters with 3TNM68 engine

JCB

• Industrial tractors and rice transplanters with TNM series engine

IHI

• 12NXE mini excavator, Carry 110 dumper

Kato

• 12VXE mini excavator

Ferris

• IS2000Z, IS2500Z zero-turn mowers

Denyo

• DLW-300LS welder / generator

Linhai

• LH300 CUV

Please note: the 3TNM68 shares its bore × stroke (68 × 72 mm) with the older 3TNA68 / 3TN68 / 3TNE68 / 3TNV68 engines, but uses a different head gasket OEM (119125-01330 instead of 119651-01340) due to its Stage V design. Do you have an older TNV/TNE/TNA engine? Then please order our gasket set SKU-80080 instead.

OEM for reference:

• 119125-01330, 11912501330 — Head gasket (cylinder head gasket) 3TNM68
• YM119125-01330, YM11912501330 — Yanmar service reference