- Technical specifications:
- Bore: 78 mm
- Injection: IDI
- Stroke: 78.4 mm
- Displacement: 1498 cm³
- Check for the old model V2203 cylinder head model1! This can be identified on the underside and on the top side in installed condition!
- Technical specifications:
- Injection: IDI
- Number of cylinders: 4
- Kubota V2003:
- New cylinder head for the newer Kubota D1005, D1105, D1305 models
- This cylinder head is suitable for the Newer models called Version 2
- Compare the mounting holes of the valve cover. See the red circles for the extra holes.
- Version 1: valve cover without extra holes: VAR-0178
- Technical specifications:
- Technical data:
- Bore: 78 mm
- Injection: Indirect injection (IDI)
- This is a new cylinder head manufactured from high-quality material. Valve seats are already installed and ready for use. The compatible models below have been researched with great care for this cylinder head.
- Complete package with gaskets for; head gasket (set), front and rear crankshaft oil seal, valve stem seals, exhaust gaskets, intake gaskets, seals and other gaskets as shown in the photo.
- Technical specifications:
- Bore: 87 mm
- Injection: Indirect injection (IDI)
- This is a new cylinder head manufactured from high-quality material. Valve seats are already installed and ready for use. The compatible models listed below have been carefully matched to this cylinder head.
- Variation: complete cylinder head with valves and springs.
- Technical data:
- Bore E3CD: 87 mm
- Bore E3CE: 85 mm
- New premium cylinder head suitable for the following models
- To make repairs easier, we offer a complete package to ensure the repair can be done as quickly as possible. This includes:
- This model has 6 valve cover bolts instead of 8! See otherwise SKU-36007-1
- Technical specifications:
- Injection: IDI
- Number of cylinders: 3
- Kubota D1302:
- Technical specifications:
- Injection: IDI
- Number of cylinders: 4
- Kubota V1702:
- Bore: 82 mm
- New cylinder head for older Kubota D1005, D1105, D1305 models
- This cylinder head is suitable for the older models referred to as Version 1
- Please compare the mounting holes of the valve cover.
- Technical specifications:
- Injection: IDI
- Technical specifications:
- Injection: IDI
- Number of cylinders: 3
- Kubota D850:
- Bore: 72 mm
- New cylinder head for the Yanmar 3TNV76 and Komatsu 3D76E, available as a complete head or as a bare head.
- Technical specifications:
- Bore: 76 mm
- Stroke: 82 mm
- Displacement: 1,115 cc
- Technical specifications:
- Bore: 78 mm
- Injection: Indirect injection (IDI)
- New premium cylinder head suitable for the following models
- Restore your Kubota engine to absolute top condition with this complete and ready-to-install cylinder head set. Specifically put together for a fast and efficient overhaul, ensuring your V1505 engine performs optimally again with minimal downtime.
Complete Cylinder Heads for Mini Tractors
What is a complete cylinder head and why is it important?
The cylinder head is a vital engine component that closes the combustion chamber, houses the valves, and controls air and fuel flow. A complete cylinder head includes valves, seats, and often camshaft assemblies, making it ready to install. In a mini tractor engine, the cylinder head ensures efficient combustion, proper power output, and engine cooling. A damaged or cracked head can cause power loss, coolant leakage, overheating, or complete engine failure.
How to choose the right cylinder head?
When selecting a complete cylinder head for your mini tractor, pay attention to:
- Compatibility: Must match the brand, model, and engine type exactly.
- Pre‑assembled or bare: Ensure whether the head comes complete with valves or as a bare head.
- Material quality: Choose cylinder heads made of durable, heat‑resistant alloys.
- Precision machining: Correct fit and valve seating are essential for long‑term performance.
- OEM standards: Use OEM or equivalent high‑quality parts to guarantee reliability.
Replacing a complete cylinder head
Replacing a cylinder head requires careful attention and precision:
- Preparation: Switch off engine, disconnect battery, and drain coolant and oil.
- Disassembly: Remove intake, exhaust, and valve cover components.
- Remove old cylinder head: Loosen bolts in proper sequence and lift off the old head.
- Install new head: Position new cylinder head with a fresh gasket, torque bolts to spec.
- Reassembly and test: Refit all components, refill fluids, and test run the engine.
Why choose Shop4trac for your cylinder head?
At Shop4trac, we supply high‑quality complete cylinder heads for mini tractors, compatible with brands like Iseki, Yanmar, Kubota, and Shibaura. All our cylinder heads are manufactured to strict standards, ensuring durability, precision, and maximum performance. With fast shipping, expert support, and competitive prices, Shop4trac is your trusted source for vital engine components.
