Tightening torque Kubota Z402 | Z482 | Z602 | D622 | D722 | D782
General information on the tightening torques of all Kubota engines as an example the head bolts etc.
An important rule is that the head bolts must first be oiled, on which the correct NM can then be measured with the torque wrench. So this means first cleaning the head bolts with the wire brush, if necessary, and then dipping them in oil. Drain this so that it cannot affect the tightening torque.
Supplies: tightening torque wrench
Adjustment of all Kubota Z402, Z482, D622, D722, D782
Valve clearance when the engine is cold:
- 0.145-0.185 mm
- 0.0059-0.0073 in inches
Head studs or bolts:
- 27.5 to 31.1 FT-LBS
- 37.2 to 42.1 NM
- 3.8 to 4.3KGF
- 27.5 to 31.1 FT-LBS
Main bearing bolt
- Bolt 1 9.4 to 11.6 FT-LBS – 12.7 to 15.7 NM
- Bolt case 19.5 to 22.5 FT-LBS
Flywheel bolts
- 39.8 to 43.4 ft-lbs
Glow plug
- 5.8 to 10.8 FT-LBS
- 7.85 to 14.7 nm
- 0.8 to 1.5KGf
All matching models
Z402 Kubota for reference:
- 400 (1997-2004), 400.4 (1997-2004), 400 Evolution (1997-2004), 500.4 (1997-2004), 500.4 Minivan (1997-2004), 500.4
- Pick-Up (1997-2004), 721 (2005-2008), 741 (2005-2008), Scouty 2005-2008, Crossline 2005-2008, City 2008-2010,
- Roadline 2008-2010, Crossline 2008-2010, Scouty 2008-2010, City 2010-2013, Crossline 2010-2013,
- Crossover 2010-2013, GTO 2010-2013, Coupe 2010-2013, City 2013-2016,
- Coupe 2013-2016, Crossline 2013-2016, Crossover 2013-2016, MEGA 1, MEGA 2, Pro D-Truck
Kubota
- B7300HSD, B7400HSD
- B1620D, BX1800, BX1850, BX1860, BX1870D, BX1880, D722-D25 (2009 and after), D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1 , D722-E4
- KC110HR-4
- B1610
- B52
- ZD18, ZD21
- A-13, A-14
- GB14
- BX1800D, BX1830D, BX1850D, BX1860D
- G1900, G1900S, GF1800, GF1800E
- K008, K008-3, TG1860-48, TG1860B54, TG186054, ZD1860AAB54, TG1860AAB54, TG1860AAB54, TG1860AAB54
Bobcat
- 316, 323, 320,
- 316, 319, 322, 323, E08, E10, E14, E16, E17, E17Z, E19, 2200D, 2200S, 2300
Komatsu
- PC100-5
Avant
- R20, 320, 320+, 320S, 320S+, 520, 520+, 523+
Giant
- D202S, D204SW, D204SW Tele
Schäffer
- 2020, 2021, 217
Takeuchi
- TB210R
Kubota engine
- D722, D722EBH, D772B, D722-E-BX, D722-E2-BX-2, D722-E3-BX-2, D722-E4-BX-1, D722-E4
Kubota Engine
- Z482-E2-GX, Z482-E, Z482-D25, Z482-B-SEC, Z482 – 60 Hz
Kubota
- B1220D, GR1600EC2, GL6000-STD, GL7000-AUS, GL7000-STD, GL7000-USA, GL7000-USA-TM, J106-AUS, J106-STD, J107-SA, J107-STD
- T1600H
Avant
- 314, 314S, 514
Mariner
- 560 (B), Mariner 710 (B), IS 7.1,
