Lower Link Pin 22×51 mm Cat. 1 – Set of 2 – Iseki | Kubota | Yanmar | Shibaura | Hinomoto | Mitsubishi

Description

New set of 2 lower link pins with a pin diameter of 22 mm and a working length of 51 mm. These pins are the standard size for Category 1 three-point hitches and fit almost all compact tractors. They are used to safely attach implements such as ploughs, tillers, mowers and trailers to the lower lift arms.

✔️ Set of 2 — complete set for left and right
✔️ Standard Cat. 1 sizing: 22 mm pin diameter × 51 mm working length
✔️ Zinc-plated steel — corrosion resistant, supplied complete with nut, washer and lynch pin hole

Technical specifications:

• Type: Lower link pin / hitch pin / drawbar pin
• Three-point hitch category: Cat. 1
• Pin diameter: 21.8 mm – 22 mm (7/8″)
• Working length (pin): 51 mm
• Total length: 140 mm
• Material: Zinc-plated steel
• Mounting: Top thread with hex nut and washer
• Locking: Lynch pin hole at the bottom (lynch pin not included)
• Supplied per: 2 pieces (left + right set)
• Application: Lower lift arms — three-point hitch

Suitable for:

Universal Cat. 1 sizing. Fits almost all compact tractors with a Category 1 three-point hitch, including:

Iseki

• TU series, TX series, TM series, TK series, TG series, TS series, TL series

Kubota

• B series, L series, BX series, GL series, ST series

Yanmar

• YM series, F series, FX series, EF series, AF series, KE series

Shibaura

• SD series, P series, D series

Hinomoto

• E series, CX series, NX series

Mitsubishi

• MT series, D series

Please note: Always check the pin diameter of your lower lift arm to be sure. Category 1 = 22 mm. For Category 0 (smaller sub-compact tractors), a different pin is required.

Installation tip:

Don’t forget the lynch pin at the bottom! Without locking, the pin can come loose during work — this is a safety risk. We recommend always using new lynch pins when (re)installing.