-
Chassis1 Product -
Clutch / transmission1 Product -
Cooling & radiators2 Products -
Electrical parts3 Products -
Engine parts29 Products -
Filters3 Products
Thumbnail image
Product
Price
- Please note: this is the M10 version (M10 x 1.25).
- For the Iseki TX1300, Mitsubishi D1300 and MT1301, Satoh S370 and ST1300 and Noda NR1301 with KE70 engine, there are two versions. Check this before ordering:
- Chassis number from 16016 or engine number KE70 from 2765: this is the correct glow plug.
- Chassis number 1 to 16015 or engine number KE70 1 to 2764: you need the M12 version.
- To the M12 version →
- ✅ With thermostat gasket
- A valve seal prevents oil from running past the valve stem into the combustion chamber, and it is important to replace these because worn seals lead to oil consumption, smoke generation, and reduced engine performance.
- Valve seals / Valve stem seals suitable for, among others, the following models:
- Iseki
- TU120, TU125, TU130, TU135, TU137, TU140, TU145, TU150, TU155, TU157, TU160, TU165, TU167, TU170, TU175, TU175F, TU177, TU1400, TU1500, TU1600, TU318, TU1601, TX1000,
- TX145, TX155, TX1410, TX1510, TX2140, TX2160, TX145, TX1410, TX2140
- Maintenance oil filter suitable for many models and brands for the following Mitsubishi engine:
- Technical specifications
- Height: 87mm
- Diameter: 67.5 mm
- Thread: M20x1.5
- verified quality
- Injection: Indirect injection (IDI)
- Technical specifications:
- Bore: 78 mm
- The piston rings are of high-quality European quality and the compatible models have been selected with great care:
- Size
- 78mm
- Head bolt of high-quality quality, produced for a sturdy and durable mounting of the Cylinder Head. Suitable for various applications in tractors, excavators, generators and marine engines.
- ✔️ High-quality steel
- ✔️ Perfect fit for Mitsubishi S3L & S4L engines
- ✔️ Widely applicable in agriculture, construction and marine applications
- ✔️ Replaces OEM references
- Nozzle type: Pintle nozzle
- Opening pressure: 125 bar
- Snel Parts premium quality. Manufactured in our own factory, allowing us to guarantee the quality ourselves. The copper windings are heavier than usual in the aftermarket segment and withstand prolonged and frequent starting better. Supplied in the Snel Parts box.
- Starter motor of Premium quality suitable for:
- Mitsubishi Engine
- S4L, S4L2
- S4L-Y262KL, S4L2-Y263KL, S4Q2-Y262KL
- Intake / exhaust: Intake
- Valve head diameter: 33.9 mm
- Valve stem diameter: 6.5 mm
- Intake / exhaust: Exhaust
- Valve head diameter: 26.9 mm
- Valve stem diameter: 6.5 mm
Showing 12 of 35 products
