Engine Oil Filters

Engine Oil Filters for Mini Tractors

What is it and why is it important?

An engine oil filter is a critical part of your mini tractor’s lubrication system. Its task is to capture contaminants such as dirt, metal particles, and carbon deposits from circulating engine oil. Clean oil reduces friction, prevents wear, and ensures smooth engine performance and long life.
If the oil filter becomes clogged or damaged, dirty oil can circulate in the engine, causing increased wear, overheating, reduced performance, or even complete engine failure. Regular oil filter replacement is essential to protect your investment and keep your mini tractor running reliably.

How to choose the right one?

The right oil filter must match your mini tractor’s brand, model, and engine type. Each tractor requires filters designed specifically for its oil flow rate and engine size.
Check your tractor’s manual or the part numbers of your current filter for compatibility. If you’re uncertain, Shop4trac’s team can guide you in selecting the correct oil filter for your machine.

Replacing/using it

Changing the oil filter is a vital part of regular servicing:

  1. Preparation: Park the mini tractor safely, turn off the engine, and disconnect the battery.
  2. Drain the old oil: Place a drain pan and remove the oil drain plug to let the old oil flow out.
  3. Remove the old filter: Unscrew the used oil filter with a filter wrench and dispose of it properly.
  4. Install the new filter: Lightly oil the gasket of the new filter, screw it in place, and tighten by hand.
  5. Refill and check: Add the recommended oil type and amount, start the engine, and inspect for leaks.

Why choose Shop4trac?

Shop4trac provides premium engine oil filters designed for Iseki, Yanmar, Kubota, Shibaura, and many other mini tractor models. Our filters ensure top-grade filtration, engine protection, and a perfect fit every time.
With quick delivery, trusted quality, and expert service, Shop4trac helps you maintain your mini tractor in peak condition for years of dependable use.

Shopping cart28
products-K026
-
+
Glow plug | Glow coil Hinomoto E14-E184 | Shop4Trac
-
+
Hydraulic pump Kubota L serie
-
+
Cardan shaft Kubota B series | Aste | type1
-
+
Glow plug | Glow coil Iseki Geas | SF | SG | TF | TM | TK | E3CD | E3100 | Shop4Trac
-
+
Pressure plate Satoh type 1
-
+
Iseki seal front axle TA207 - TA317 | TA530 - 5140 | MF1250 | Shop4Trac
-
+
Thru axle rim - Wheel hub Kubota B5000 - B7100 | B1200 - B1702
-
+
Clutch Pressure plate Yanmar Type 1
-
+
Ignition key Iseki TU | TG | TA series
-
+
Water pump Iseki TS
-
+
Pressure Plate New Holland TC45 | T2320 | T2330 | TYM 5010 Boomer 3045 - 3050 | Kubota L3600 - L5060
-
+
Upper Radiator Hose Kubota B1200-1502 | Shop4Trac
-
+
Water pump Iseki TU up to 18PK K3A | K3B | K3C | K3D | K3E | K3F
-
+
Thrust washer set Kubota D905 | D1005 | D1105 | V1205 | V1305 | V1505
-
+
Starter motor Kubota B1200 - B8200 | Z430 | Z500 | Z650 | D750 | D850 | D950
-
+
Filter Kit Mitsubishi MT1301 | MT1401 | MT1601 | Noda | Satoh
-
+
Gasket Set Mitsubishi S3l | S3l2 | Mahindra | Caterpillar | Pel-job | Weidemann | Solis 26
-
+
Air filter | Iseki GEAS TG | Kubota GL | KT | KL | ST | GT
-
+
Glow plug | Glow coil Kubota B1200-B1702 | B5000-B7100
-
+
Pressure plate Suzue | Shop4Trac
-
+
Release bearing Yanmar type 1 | Shop4Trac
-
+
Release bearing Shibaura type 2
-
+
Filter Kit Iseki TX1210 - TX2160 | Bolens G152 - G174 | H1704
-
+
V-belt Kubota B5000 – B7001 | B6100 – B7100
-
+

Hoofdmenu