Thumbnail image
Product
Price
- Exclusive from our own production line: a high-quality fuel injector nozzle that meets the strictest tolerances. This 'Snelparts' injector tip is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- Expert advice: don't settle for cheaper alternatives. Extensive research has been done into OEM quality such as well-known brands in this industry!
- Includes a complete seal kit for immediate installation! We supply this nozzle with all necessary new copper washers as standard. This allows you to get started safely and leak-free right away. The included kit contains:
- A new heat shield (sealing washer) to protect against extreme heat and carbon buildup.
- Fuel Injector Nozzle including seal kit (DLLA160PN129)
- Exclusive to our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' multi-hole injector is developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in Iseki compact tractors with direct injection.
- ⚠️ Mechanic's tip (Choose the right flow rate!): Note: This DLLA160PN129 nozzle looks identical to the DLLA160PN126 on the outside. Although both are suitable for Iseki direct injection engines (160° spray angle), the internal fuel flow rate differs. Fitting the wrong variant can lead to a rough-running engine or smoke. Therefore, always check the stamped number (PN129 or PN126) on your old nozzle!
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern (160° spray angle for direct injection) ✔️ Produced to the strictest OEM tolerances ✔️ Results in cleaner combustion and a smoother running engine
- Exclusively from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' multi-hole injector was developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in the well-known Mitsubishi K3E and K3F diesel engines.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect atomization pattern (155° spray angle)
- ✔️ Manufactured to the strictest OEM tolerances
- ✔️ Results in cleaner combustion and a smoother running engine
- Fuel Injector Nozzle including seal kit (DLLA154PN095)
- Exclusively from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' multi-hole injector has been developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in the iconic Iseki TL series and Bolens compact tractors.
- ⚠️ Mechanic's tip (Check your engine series!): This DLLA154PN095 nozzle has a spray angle of 154 degrees and is only suitable for the old series of the Isuzu / Iseki 3AE1 and E3AE1 engines. Iseki adjusted the injection angle in later series. Always check if the stamped number on your current nozzle matches PN095 before ordering!
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect atomization pattern (154° spray angle for direct injection) ✔️ Produced according to the strictest OEM tolerances ✔️ Results in cleaner combustion and a smoother running engine
- Complete Fuel Injector suitable for:
- For other E3CD, E3CE, E3CF nozzles, search for DNOPDN133 in the search bar to find other variants!
- Includes complete seal kit for immediate installation! We supply this nozzle with all necessary new copper washers as standard. This allows you to get started safely and leak-free right away. The included set consists of:
- A new heat shield (nozzle washer) to protect against extreme heat and carbon buildup.
- A copper injector seal for 100% compression retention.
- Exclusive from our own production line: a high-quality fuel injector nozzle that meets the strictest tolerances. This 'Snelparts' injector tip is developed as the superior alternative to standard aftermarket parts.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion.
- Expert advice: don't settle for cheaper alternatives. Extensive research has been done into OEM quality such as well-known brands in this industry!
- technical specifications
- Opening pressure: approx. 120 – 130 bar
- Fuel Injector | Injector nozzle + Holder OEM from Mitsubishi suitable for:
- This is an original Mitsubishi part
- Mitsubishi
- D1500V, ST1510, ST1520, ST1540, D1550, ST1420, ST1440, D1450, ST1620, ST1640, D1650, ST1820, ST1840, D1850, ST2020, ST2040, D2050, ST2320, ST2340, D2350, ST2620, ST2640, ST2650
- MT1401, MT1601, MT1801, MT2001, MT2201, MT2501, MTE1800, MTE2000, MT160, MT180, MT180H, MT210, MT250, S370
- Fuel Injector Nozzle including sealing kit (DLLA150P73)
- Exclusive from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' multi-hole injector was developed as a superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in specific direct-injection Mitsubishi engines. These engines are also widely used in popular compact tractors from Deutz-Fahr, Lamborghini, and Same.
- ⚠️ Mechanic's tip (Check your injection type!): Note: This DLLA150P73 nozzle has a 150-degree spray angle and is intended exclusively for engines with direct injection (DI), such as the K3F-DI and K4F-DI. Never install this in an indirect injection engine (pre-chamber) to prevent soot buildup and engine damage. To be sure, check the stamped number on your old nozzle.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern (150° spray angle for direct injection)
- Fuel injector nozzle including sealing kit (Fits this injector: 129602-53001 nozzle model: DLLA159P185)
- Exclusively from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' nozzle was developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in various Yanmar, Komatsu, and Hitachi applications.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern and exact sealing
- ✔️ Manufactured to the strictest OEM tolerances
- Fuel Injector Nozzle including sealing set (DLLA160PN126)
- Exclusive from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' multi-hole injector is developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector in Iseki and Massey Ferguson compact tractors.
- ⚠️ Mechanic's tip (Check your injection type!): Note: Iseki built the E3 engine series with both direct and indirect injection. This DLLA160PN126 nozzle is only suitable for engines with direct injection (DI). Does your engine have indirect injection (a swirl chamber/pre-chamber)? Then you need the pintle injector with number DN0PD620. Always check the stamped number on your old nozzle!
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern (160° spray angle for direct injection)
- Fuel injector nozzle including seal kit for Yanmar 3TNV76
- Exclusive from our own production line: a high-quality fuel injector nozzle (tip) that meets the strictest tolerances. This 'Snelparts' nozzle was developed as the superior alternative to standard aftermarket parts and is perfect for overhauling your current fuel injector.
- We guarantee a perfect spray pattern and an exact seal, resulting in a smoother running engine and cleaner combustion. Advice from experience: don't go for cheaper alternatives. Extensive research has been done into OEM quality, comparable to the well-known brands in this industry!
- ✔️ Perfect spray pattern and exact seal ✔️ Produced to the strictest OEM tolerances ✔️ Results in cleaner combustion and a smoother running engine
- Includes a complete seal kit for immediate installation! We supply this nozzle as standard with all necessary new copper washers. This allows you to place the fuel injector back into the engine block safely and leak-free immediately after assembly. The included set consists of: • A new heat shield (nozzle washer) against extreme heat and carbon buildup. • A copper fuel injector seal for 100% compression retention. • A return line seal to prevent fuel leakage.
- Plunger for Kubota fuel pump
- Kubota engine
- D1005, D1105, D1305
- OEM for reference
- 140161-0120, 16030-51050
Showing 12 of 49 products
